Paradyne 3151 Quick Reference page 9

Table 2. Network Interface Configuration Options (2 of 2)
Option
NET LLB: NET LLB:
NET PLB: NET PLB:
BitStuff:
KeepAlive: KeepAlive:
Yellow: Yellow:
Circuit Ident: Circuit Ident:
CRC PThru CRC PThru
(Passthrough):
Table 3. General Configuration Options
Option
Tst Timeout: Tst Timeout:
Tst Duration: Tst Duration:
Factory 1 Factory 2
Enab Enab
Disab Disab
Enab
Disab
62411
N/A N/A
Part68
Disab
AIS
One (Framed One (Framed
All Ones) All Ones)
NetLp NetLp
(Loopback of (Loopback of
network signal) network signal)
Enab Enab
Disab Disab
Edit
Clear Clear
Enab Enab
Disab Disab
Factory 1 Factory 2
Enab
Disab
10
Up
Down
Save
6
Comments/Description
Network-initiated LLB allows LLB to be
Network-initiated LLB allows LLB to be
controlled by inband LLB codes.
N/A N/A Network-initiated PLB allows PLB to be Network-initiated PLB allows PLB to be
controlled by FDL PLB messages.
Enforces ONEs density protection per Enforces ONEs density protection per
AT&T TR 62411, ANSI T1-403, and
FCC Part 68 Technical Publication FCC Part 68 Technical Publication.
AIS
Specifies the keep alive signal to send
to the network interface on a failure of to the network interface on a failure of
the DTE signal.
Transcodes and sends Yellow signal to
the network on receiving Yellow from the network on receiving Yellow from
DTE.
Edit
Specifies the transmission vendor's Specifies the transmission vendor s
circuit identifier.
Determines whether framing bits are Determines whether framing bits are
passed to the DTE.
Comments/Description
Enab
Specifies whether user-initiated
tests are limited by the Tst Duration tests are limited by the Tst Duration
Disab
configuration option.
10
Up
Specifies in minutes the duration of Specifies in minutes the duration of
user-initiated tests.
Down
Save
, ,
g