Paradyne 3151 Quick Reference page 13

Table 6. General Management Configuration Options (1 of 2)
Option
SNMP Mgt: SNMP Mgt:
NMS Valid: NMS Valid:
Num Sec Mgrs: Num Sec Mgrs:
NMS n IP Adr: NMS n IP Adr:
NMS n Access: NMS n Access:
System Name: System Name:
System Location: System Location:
System Contact: System Contact:
CommunityName1: CommunityName1:
Access 1: Access 1:
CommunityName2: CommunityName2:
Access 2: Access 2:
IP Adr: IP Adr:
NetMask: NetMask:
Com IP Adr: Com IP Adr:
Factory 1 Factory 2
Disab Disab
Enab Enab
Disab Disab
Enab Enab
1
2–10 2–10
Edit
Clear Clear
Read Read
R/W
Edit
Clear Clear
Edit
Clear Clear
Edit
Clear Clear
Edit
Clear Clear
Read Read
R/W
Edit
Clear Clear
Read Read
R/W
Edit
Clear Clear
Edit
Clear Clear
Edit
Clear Clear
10
Comments/Description
Specifies whether the DSU/CSU p
responds to SNMP session responds to SNMP session
requests.
Specifies whether the DSU/CSU
validates the IP address of an validates the IP address of an
SNMP manager attempting
access.
1
The number of SNMP managers The number of SNMP managers
allowed to access the DSU/CSU.
Edit
Allows you to define or clear the y
allowable IP address of an SNMP allowable IP address of an SNMP
manager.
The type of access allowed for an yp
SNMP manager using community SNMP manager using community
R/W
name 1.
Edit
The SNMP system name for this The SNMP system name for this
device.
Edit
The SNMP system location for this The SNMP system location for this
device.
Edit
The SNMP system contact name The SNMP system contact name
for this device.
Edit
A community name that is allowed
access to this device Defaults to access to this device. Defaults to
public .
The type of access allowed for The type of access allowed for
community name 1.
R/W
Edit
A community name that is allowed A community name that is allowed
access to this device.
The type of access allowed for The type of access allowed for
community name 2.
R/W
Edit
The IP address needed to access The IP address needed to access
the device.
Edit
The Subnet Mask needed to The Subnet Mask needed to
access the device.
Edit
The IP address for the COM port The IP address for the COM port
when configured for SNMP.
y