Paradyne 3151 Information Manual page 6

6
2. Hold the circuit card vertically at the front of the carrier, with the faceplate latch
in the open position.
3. Insert the card into the top and bottom card guides of one of the slots
numbered 1–16.
4. Slide the card into the slot. The ejector latch lifts up as it engages the metal
flange.
5. Press the latch up until it clicks into the locked position to secure the circuit
card in the carrier.
6. Rotate the circuit pack lock back into the closed position and tighten the screw.
CIRCUIT
CARDS
LATCH
CIRCUIT CARD
GUIDES
July 2000
COMSPHERE®
3000 SERIES
CARRIER
C O
M S
P H
E R
E
3 0
0 0
496-14389-01
3100-A2-GK40-40