Sony HANDYCAM DCR-DVD910 Operating Manual page 97

IMOVIE MEDIA SETI
IAUDIO MODE[
IWIDE SELECTI
IS UB-T DATE[
[FLASH MODE[
[{_INDEX SET]
[CONVERSION LENS]
[_[IMA(IE SIZE]
]FILE N O.]
[_ DISPLAY]
]VOLUME]
[BEEP]
[TV TYPE]
]CLOCK SET]
[AREA SET]
[DST SET]/[S UMMERTIME]
[{_]
L ANGUAGE SET]
[DEMO MODE]
Your camcorder vibrates.
• Vibration occurs depending on the condition
of the disc. This ixnot a malflmction.
A vibration is felt in your hand or a
faint sound is heard during
operation.
• This is not a malfunction.
A motor sound is heard in the
camcorder when the disc cover is
closed without a disc.
• Your camcorder ix trying to recognize the
disc. This ix not a malfunction.
Your camcorder gets warm.
• This is because the po_ er has been turned on
R)r a long time. This is not a malfunctkm.
Turn off your camcorder and leave it for a
while ill a cool place.
• Remove any obstructions between the
Remote Commander and the remote sensor.
• Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not flmction properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander.
• Select a comnlander nlode other than DVD 2
for your DVD device, or cover the sensor of
your DVD device with black paper.
The power abruptly turns off.
• When approximately 5 minutes have elapsed
while you do not operate your camcorder, the
camcorder ix automatically turned off
(A.SHUT OFF). Change the setting of
[A.SHUT OFF] (p. 84), or turn on the power
again, or use the AC Adaptor.
• If the time set with [QUICK ON STBY]
(p. 84) has el ipsed ill sleep mode, your
camcorder turns off automatically. Turn on
your camcorder again.
• Charge the battery pack lp. 2(t).
The CHG (charge) lamp does not
light while the battery pack is being
charged.
• Turn tile POWER switch to OFF/CHG)
(p. 20).
• Attach the batte U pack to the camcorder
correctly (p. 211).
• Connect the power cord (mains lead) to the
wall outlet/wall socket) properly.
• The battery charge is completed (p. 20).
m
-4
The supplied Remote Commander
does not function.
• Set [REMOTE CTRL] to ION] (p. 84).
• Insert a battery
into the battery case with the
+_ polarities correctly matching the +_
marks (p. 126).
The CHG (charge) lamp flashes while
the battery pack is being charged.
• Attach the battcl T pack to the cumcordcr
correctly (p. 211). If the problem persists,
disconnect the AC Adaptor from the wall
Continued.._
97