Sony HANDYCAM DCR-DVD910 Operating Manual page 75

You call select tile maximtlm zoom level ill
case you want to zoom greater than optical
zoom magnification. Note that the image
quality decreases when you use the digital
zoom.
WE BZZI JT
The right side of the bar shows the digital
zooming htctor. The zooming zone appears
when you _lect the zooming levch
P,.OFF
Up to 15 x zoom is performed optically.
30,,
Up to 15 × zoom is performed optically, and
after thaL up to 30 × zoom is perlbrmed
digitally.
180x
Lipto 15 × zoom is performed optically, and
after that, up to 180 x zoom is perl_)rmed
digitally.
You cat/compensate for camera shake. Set
[STEADYSHOT] to [OFF] ('_") when
using a tripod (optiomfl), then the im:lge
becomes naturah The default setting is
ION].
hen rec( rdin_, ill dark places, tile shutter
speed is automatically reduced to 1/30
second. Tile defaull setting is
ION].
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear.
The default setting is [OFF].
"_° Tips
• Positioning the subject at the cross point ot tile
guide h:ame makes a bahmced composition.
Diagonal stripes appear in portions of tile
screen where brightness is at a preset level.
This is useful as a guide when a_/iusting tile
brightness. When you change tile def:mlt
setting, [] is displayed. The zebra pattern
is not recorded.
_0FF
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
0
Notes
• Portions ()lille screen where brightness is about
lO0 IRE or above may appear overexposed,
"_° Tips
• IRE represents file unit ol images briglaness
amplitude.
3
E:
-<
=_
g
3
Continued._
75