Paradyne Hotwire 5446 Installation Instructions Manual page 6

3. Locate the DSL pair of T1/R1 connectors on the customer premises side of the NID
or punchdown block. Attach the wiring that will be connected to the DSL jack.
In the following example, a NID is used without a POTS splitter. It includes an
existing POTS line and a second pair installed for DSL access.
Telephone Network Interface Device (NID)
Wiring to
DSL Jack
Existing POTS
Wiring to
Telephone
Customer Premises
Tip
T1
(Green)
Ring
R1
(Red)
Demarcation Point
Ground
6
DSL Pair
POTS Pair
DSL/POTS
Access from
Local Loop
97-15438-01