Paradyne Hotwire 5446 Installation Instructions Manual page 10

3. Insert the supplied power cord's round end into the jack labeled POWER. Plug the
transformer into an AC outlet.
Hotwire RTU
Power
Jack
or
Transformer
or
98-15836
The RTU hardware installation is now complete. When the power cord is installed,
the RTU goes through a power-on self-test.
Power-On
When power is applied, the RTU performs self-diagnostics and the PWR LED is on.
The self-diagnostics includes a power-on self-test. During the power-on self-test,
all of the LEDs turn on for one second.
Power – green
Alarm – red
Test – yellow
Digital Subscriber Line – green
Ethernet Link – green
PWR ALM TST ETHERNET
DSL
5446
TM
97-15317
Refer to Troubleshooting on page 11 for LED indications requiring action.
10