Write System Configurations - Paradyne 1740 SHDSL User Manual

1740 SHDSL 2/4-Wire Router User's Guide
3.6.3

Write System Configurations

The new parameters can function immediately without being saved to the flash memory. To use these
parameters after you restart the router, you must save them to the flash memory.
To write the configurations, click on the Save & Reboot button. Click on the Save button on the main
screen. If you need to reboot the device after writing the configurations, also click on the Reboot button.
1740-A2-GB20-20 May 2005 31