Chapter 3 Basic Configuration; Login - Paradyne 1740 SHDSL User Manual

1740 SHDSL 2/4-Wire Router User's Guide
CHAPTER 3
This section describes how to manage the router via a web browser from the remote end. The web pages
are best viewed with a display resolution of 1024 x 768 pixels. To change the resolution, go to the
Microsoft Windows Control Panel and click on the Display icon. You will find the display settings there.
3.1

Login

STEP 1: Configure your workstation to the same network segment as the router, if for example the router
is set to its default address of 192.168.1.1, you could set the PC to IP addresss 192.168.1.133
with a subnet mask of 255.255.255.0.
STEP 2: Start your Internet browser.
STEP 3: Enter the IP address of the router in the web address field. For example, if the IP address is
192.168.1.1, enter http:// 192.168.1.1
12
Basic Configuration
May 2005 1740-A2-GB20-20