Static Bridging (Mac Filter) - Paradyne 1740 SHDSL User Manual

1740 SHDSL 2/4-Wire Router User's Guide
3.6.2

Static Bridging (MAC filter)

Click on the Static tab to configure, modify, and delete the MAC filter functions.
Add
Modify
Delete
Flush
MAC Address: This is the MAC address of the PC. Each PC has a unique MAC address, such as
0a:01:1a:11:00:0b.
Port Map: There are three modes to set up the data processing method for the LAN and ATM
interfaces: filter, forward, and dynamic. For example, if the Port Map is set to: LAN – Forward, and
others- Filter, it means the packets will be forwarded to the LAN interface and will not reach the ATM
interfaces. In dynamic mode, the operating mode of the MAC address in the interface follows the
learning result of the bridging function.
30
Add a static bridging entry
Modify the static bridging entries
Delete a static bridging static entry
Delete all the static bridging entries
May 2005 1740-A2-GB20-20