Using An S-Video Vcr Or Other S-Video Source - Zenith Presentation PRO900X Operating Manual

USING AN S-VIDEO VCR OR OTHER S-VIDEO SOURCE

Use the Trackball Remote to Access Menus and Make Changes
Once the HD Display has been installed and set up, follow these simplified instructions for operation. Be sure to
install batteries in the remote. See "Trackball Remote" section for further instructions regarding remote operation.
S-Video VCR or other S-Video Source Setup Instructions
Connections S-Video Out to S-Video In on HD Display
VCR Audio Out to Audio In of User Supplied Stereo System or
Audio Amplifier.
Menus Source Menu -
Select S-Video as Video image source.
Setup Menu -
Select Aspect Ratio and select proper ratio.
Select Static Setup and adjust if necessary.
Video Menu -
Make S-Video Source adjustments if necessary.
Format If the new S-Video source has not been connected before, it
may be in a format not recognized by the HD Display. If the
new format is not recognized, save it and give it a name.
Adjustments Make any additional image adjustments as
required for this unique setup. See the "Installation and Setup
Guide for System Installer" for set up instructions.
206-3275-A
USERS QUICK REFERENCE GUIDE
Source Menu with S-Video
selected as Input Source
P A G E 1 3