Amplifier Volume Override; Cable Volume Override - Zenith Presentation PRO900X Operating Manual

TRK4000PT TRACKBALL REMOTE CONTROL
Control the volume on your sound amplifier while in other modes

AMPLIFIER VOLUME OVERRIDE

1. Find the code that operates your amplifier. Test it to
make sure it's the correct one by following the procedure
in "Programming Your Remote" on page 14.
2. Press and hold MUTE and FLSHBK on your remote until
the indicator light stays lit.
3. Press MODE Left/Right until the indicator light is under
the mode that you want Amplifier Volume to appear, for
example, TV.
4. Enter the special code: 4-9-9, then quickly press ENTER.
(The indicator should blink and then turn off.)

CABLE VOLUME OVERRIDE

1. Find the code that operates your cable box. Test it to
make sure it's the correct one by following the procedure
on "Programming Your Remote" on page 14.
2. Press and hold MUTE and FLSHBK on your remote until
the indicator light stays lit.
3. Press MODE Left/Right until the indicator light is under
the same mode that you chose in step one.
4. Enter the special code: 3-9-9, then quickly press ENTER.
(The indicator light should blink and then turn off.)
The VOLUME and MUTE keys now control the cable box.
Notes:
• Your volume and mute keys now control your amplifier.
To change everything back to factory settings, reprogram all keys
with their original codes. See "Programming Your Remote," on
page 14.
• If you can't find the code for your amplifier, use the Auto Find
feature.
206-3275-A
cable
3
mode
surf
2
4
5
8
0
pip
play
rew
stop
2
ffwd
P A G E 1 9