Vcr Connections - Zenith R40W46F Installation And Operating Manual

External Equipment Connection and Viewing Setups

VCR Connections

1. Connect the audio/video output jacks from the
VCR to IN 1 (A/V) jacks on the TV.
2. Select source with the tv/video button.
• If you connect the audio/video output jacks
from the VCR to the IN2, IN3, or IN4 jacks on
the TV, select
3. Press the PLAY button on the VCR.
The Video playback appears on the TV screen.
Notes
• If using a monaural VCR, connect the output
jack from VCR to the AUDIO L/MONO IN jack
on TV so that the sound can be heard from both
speakers. If you connect the output jack to the
AUDIO R IN jack on the TV, the sound is only
heard from right speaker.
• When the input jacks on the front panel and
back panel are connected to external equipment
at the same time, the input jacks on the front
panel have priority over the input jacks on the
back panel of the TV.
S-VHS VCR Connections
1. Connect the S-VHS output jack from the VCR
to one of the available S-VIDEO jacks on the
TV.
2. Connect the audio output jacks from the VCR
to the IN 1 or IN 3 jacks on the TV.
3. Select or
tv/video button.
4. Press the PLAY button on the VCR.
Video playback appears on the TV screen.
Monitor Out Connection and Setup
1. Connect the audio/video input jacks from a
second TV/Monitor to the MONITOR OUTPUT
(A/V) jacks on the TV .
2. See the operating manual of the second TV or
monitor for further details regarding that
device's input source selection.
, , or .
source with the
28
TV
VIDEO (L)-AUDIO-(R)
MONITOR
OUTPUT
2
IN
DVI
( )
AUDIO
1
IN
MONO
VIDEO (L)-AUDIO-(R)
MONITOR
OUTPUT
2
IN
DVI
( )
AUDIO
1
IN
MONO
S - VIDEO
TV
TV
VIDEO (L)-AUDIO-(R)
MONITOR
OUTPUT
IN 2
DVI
( )
AUDIO
1
IN
MONO
Playback VCR
Playback VCR
Second TV