Clock Set; Timer Setup; On/Off Timer; Enable/Disable On/Off Timer - Zenith Presentation PRO900X Operating Manual

SETUP MENU

Clock Set

To set the clock, move the cursor to Clock Set and press
down on the trackball to highlight the option. With the
cursor placed over the right arrow of Clock Set, press and
hold the trackball down to move time ahead. With the
cursor placed over the left arrow, press and hold the
trackball down to move time backward.
Preferred Method to Set Clock
With Clock Set highlighted, move the cursor to the
option status display rectangle and place the cursor over
the hours and minutes or AM and PM and change them
directly.
The option changes you make will be displayed in the
lower portion of the menu in the option status display.
Timer Setup (Timer Menu only appears if clock is set)
Set On/Off Time
The On/Off Timer can be programmed with up to 4 turn-
on times and up to 4 turn-off times.
As you can see to the right, the HD Display is set to turn
On at the beginning of the work day. When the staff
goes to lunch, it turns Off until they return.
The HD Display remains On until 5:00 pm. After dinner,
the HD Display turns On and remains On until 10:00 pm.
The On/Off Timer could be disabled Friday afternoon for
the weekend and enabled Monday morning, ready for the
work week.

Enable/Disable On/Off Timer

Retains but temporarily disables On/Off Timer settings.
For example, you may want to enable the On/Off Timer
Monday - Friday, but disable the On/Off Timer Saturday
and Sunday. When you return on Monday you would then
enable the On/Off Timer.
9:00 am
Adjustments
Move the cursor to the desired option (On Time 1, On
Time 2, Off Time 3, On/Off Timer, etc.) and press down
on the trackball to highlight the option. Move the cursor
to the left or right arrow of the highlighted option, press
or press and hold down the trackball to change time.
For example, with the cursor placed over the right arrow
of the On Time 1 option, press and hold the trackball
down to move time ahead. With the cursor placed over
the left arrow, press and hold the trackball down, to
move time backward.
Note: You can also move the cursor to the option status dis-
play rectangle and place the cursor over the hours and minutes
or AM and PM and change them directly.
P A G E 2 5
3275-A