Electrolux WTGL3VIT200 User Manual page 29

Do not use an extension hose if the in-
let hose is too short. Contact the serv-
Water-stop device
WATER DRAINAGE
There are different procedures to connect
the drain hose:
With the plastic hose guide.
A
• Connect the water inlet hose to the cold
water tap with 3/4 thread.
Caution! Make sure that there are no
leaks from the couplings.
ice centre for the replacement of the in-
let hose.
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The red
sector in the window «A» shows this fault .
If this occur, close the water tap and con-
tact the service centre to replace the hose.
electrolux 29