Table of Contents
Advertisement
3. Customize the unit of measurement and other
settings.
To customize the unit of measurement, the time
zone, or other settings, touch Equipment Settings
and then touch the desired settings.
The console can display speed and distance in
standard or metric units of measurement.
4. View machine information.
Touch Equipment Info and then touch Machine Info
to view information about your incline trainer.
5. Update the console firmware.
For the best results, regularly check for
firmware updates. Touch Maintenance and then
touch Update to check for firmware updates using
your wireless network. The update will begin auto-
matically. IMPORTANT: To avoid damaging the
console, do not turn off or unplug the incline
trainer while the firmware is being updated.
The screen will show the progress of the update.
When the update is complete, the incline trainer
will turn off and then turn back on. If it does not,
use the power switch (see HOW TO TURN ON
THE POWER on page 14) to turn the incline trainer
off, wait for a few seconds, and then turn it back
on again. Note: It may take a few minutes for the
console to be ready for use.
Note: Occasionally, a firmware update may cause
the console to function slightly differently. These
updates are always designed to improve your
exercise experience.
6. Calibrate the incline system of the incline
trainer.
Touch Calibrate Incline and then touch Begin to
calibrate the incline system. The incline trainer will
automatically rise to the maximum incline level, and
then return to the starting position. This will cali-
brate the incline system. Touch Cancel to return to
the maintenance section. When the incline system
is calibrated, touch Finish.
IMPORTANT: Keep pets, feet, and other objects
away from the incline trainer while the incline
system is calibrating. In an emergency, pull
the key from the console to stop the incline
calibration.
7. Exit the settings main menu.
If you are in a settings menu, touch the back arrow.
Then, touch the close button (x symbol) to exit the
settings main menu.
21
Advertisement
Table of Contents
