Advertisement
3
D
F
4
5
CONNECTION VALVE ASSEMBLY
For pool with connection valve.
NOTE: If you want to connect other pool cleaning kits to the pool
through the connection valve, disassemble the Debris Screen
from the Connector.
A
FILLING POOL WITH WATER
ATTENTION: Do not leave pool unattended while filling with
water.
1. Fill the pool until the water reaches the welding line located
5cm-20cm (2.0''-7.9'') from the top of the pool. DO NOT
OVERFILL as this could cause the pool to collapse. In times of
heavy rainfall you may need to empty some of the water to
ensure the level is correct.
2. When filling the pool is completed, check that the water is not
collecting on any side to ensure the pool is level.
IMPORTANT: If pool is not level, drain water and re-level
ground by digging out. Never attempt to move the pool with
water in it, serious personal injury or damage to the pool may
result.
B
E
2.5cm-5cm
(1"-2")
B
8
WARNING: Your pool may contain a great deal of pressure. If
your pool has any bulge or uneven side then the pool is not
level, the sides may burst and the water may discharge
suddenly causing serious personal injury and/or damage to
property.
3. Check pool for any leaks at valves or seams, check any
evident water loss. Do not add chemicals until this has been
done.
POOL MAINTENANCE
If you do not adhere to the maintenance guidelines below, your
health might be at risk, especially that of your children.
Using chemical tablets (not included):
NOTE: Chemconnect or Chemical Floater must be used when
you perform chemical maintenance with tablets. Your purchased
item may not include any of those dispensers, in this case you
can purchase it by visiting our website www.bestwaycorp.com or
at the nearest pool dealer.
IMPORTANT: Don't use granulate tablets or throw the tablet
directly in the water. The chemicals can deposit on the bottom,
damage the material and discolor the PVC.
5cm-20cm
(2.0"-7.9")
0°
Advertisement
