Advertisement
6
CONNECTION VALVE ASSEMBLY
For pool with connection valve
NOTE:
If you want to connect other pool cleaning kits to
the pool through the connection valve, disassemble the Debris
Screen from the Connector.
A
FILLING POOL WITH WATER
ATTENTION:
Do not leave pool unattended while
filling with water.
POOL MAINTENANCE
If you do not adhere to the maintenance guidelines below, your health might be at risk, especially that of your children.
Using chemical tablets (not included):
NOTE:
Chemconnect or Chemical Floater must be used when you perform chemical maintenance with tablets. Your purchased
item may not include any of those dispensers, in this case you can purchase it by visiting our website www.bestwaycorp.com or at the
nearest pool dealer.
IMPORTANT:
Don't use granulate tablets or throw the tablet directly in the water. The chemicals can deposit on the bottom,
damage the material and discolor the PVC.
Using chemical liquid (not included):
1in.-2in.
(2.5cm-5cm)
B
8
1. Fill the pool until the water reaches the welding line located
4.7in.-7.9in. (12cm-20cm) from the top of the pool. DO NOT
OVERFILL as this could cause the pool to collapse. In times
of heavy rainfall you may need to empty some of the water to
ensure the level is correct.
2. When filling the pool is completed, check that the water is not
collecting on any side to ensure the pool is level.
IMPORTANT:
re-level ground by digging out. Never attempt to move the
pool with water in it, serious personal injury or damage to the
pool may result.
WARNING:
Your pool may contain a great deal of
pressure. If your pool has any bulge or uneven side then the
pool is not level, the sides may burst and the water may
discharge suddenly causing serious personal injury and/or
damage to property.
3. Check pool for any leaks at valves or seams, check any
evident water loss. Do not add chemicals until this has been
done.
If pool is not level, drain water and
4.7in.-7.9in.
(12cm-20cm)
0°
Advertisement
