Table of Contents
Advertisement
MANUAL CLOCK SETTING
You must set the date and time manually for Timer
Recordings, ON/OFF Timer and Daylight Saving Time
if the Auto Clock process did not set them correctly.
EXAMPLE: Setting the clock to "8:30 AM", 26th (SAT)
October, 2002.
1
Press the MENU button.
Press the SET + or – button to
select the SYSTEM SET-UP
option, then press the ENTER
button.
2
Press the SET + or – button to
select the CLOCK SET option,
then press the ENTER button.
3
Press the SET + or – button to set
the month, then press the ENTER
button.
4
Set the day, year and time as in
step 3.
After setting the clock, date and time
starts functioning automatically.
•
NOTES:
After a power failure or disconnection of the
power plug, the time display will be lost. In
this case, set the present time again if the
Auto Clock did not set correctly.
•
To move cursor backward, press the CANCEL
button.
TV OPERATION
1
To turn on the TV/VCR, press the POWER button.
2
Adjust the volume level by
pressing the VOL.
ton. The volume level will be
indicated on the screen by
green bars. As the volume level
M E N U
increases, so do the number of
TIMER REC SET
TV SET-UP
bars. If the volume decreases, the number of green
CH SET-UP
AUTO REPEAT ON OFF
bars also decreases.
SYSTEM SET-UP
3
Set the TV/CATV menu option to the appropriate
+/–/ENTER/MENU
position (See page 15).
SYSTEM SET-UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK
ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
VHF/UHF/CATV CHANNELS
+/–/ENTER/MENU
CLOCK SET
MONTH
10
DAY
1 (SUN)
YEAR
2000
12 : 00 AM
TIME
+/–/ENTER/CANCEL/MENU
á
ñ
4
Press the Direct Channel selection buttons to select
the channel.
á
ñ
• TV mode direct channel selection
• CATV mode direct channel selection
• TO SELECT CATV CHANNELS:
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed,
the corresponding channel will be
selected in 2 seconds.
NOTES:
or
TV
- VHF/UHF Channels
CATV - CABLE TV Channels
TV
VHF
2-13
UHF
14-69
100-125 (100)(125)
When the TV/CATV menu option is in the TV
position, all channels can be instantly selected by
using two buttons (for example, to select channel 2,
press "0", then "2". If you press only "2", channel
selection will be delayed for a few seconds). For
channels 10 and above, press the 2 digits in order.
When the TV/CATV menu option is in the CATV
position, channels can be selected as follows:
1-9
Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press "002".
10-12
Press "0", then the remaining 2 digits.
Example, to select channel 12, press "012".
13-99
Press the 2 digits in order.
Example, to select channel 36, press "36".
100-125 Press the 3 digits in order.
Example, to select channel 120, press "120".
•
If a channel with no broadcast is selected,
the sound will automatically be muted.
•
If a station being viewed stops broadcasting,
the TV will automatically shut itself off after
15 minutes.
but-
VOLUME
32
CATV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
01 (5A)
CH 012
13
Advertisement
Table of Contents
