Table of Contents
Advertisement
Step 4: Use the + and -
buttons to select the day
to copy the programs to.
Step 5: Press the TIME
button to copy the
programs. The 'TO' will
flash to confirm the
programs have been
copied.
Setup menu
1. Press and hold TEMP and MODE together for 5
seconds.
2. The display will enter the setup menu.
3. Use + and - to change a value.
4. Use TIME to scroll between the settings.
5. Use PROG to exit the setup menu
1 - Temperature
calibration
The temperature reading
is factory calibrated
but if for any reason it
needs adjusting (better
accuracy required, to suit
different position in the
room etc.), the reading
can be recalibrated in
0.5 degree steps.
3 - Adjust fan speed
(Select models only. Does
not apply in manual
control mode)
4 - Set minimum
temperature
5 - Set maximum
temperature
6 - Enable/disable
open window
detection
7 - Open window
detection time
8 - Temperature drop
in open window
detection time
9 - Closed window
detection time
A - Temperature rise
in closed window
detection time
Issue 003 - March 2024 | SmithsEP.co.uk | 9
Advertisement
Table of Contents
