Table of Contents
Advertisement
Setting the automatic program schedule
An example of one day program on HHPS01
PROGRAM 1
°C
20
19°C
10
06.00
Logic diagram for setting program on HHPS01
PROG
Mon
This section provides an example of how to set the
7-day program for one day. The example will
program the timer to maintain 21°C from 08:00
until 16:00. It will maintain 4°C from 16:00
onwards. It does this by setting the programs as
follows;
Prog 1 - Set to 08:00 and 21°C
Prog 2 - Set to 16:00 and 4°C
Prog 3, 4, 5, 6 - Set to inactive
The steps to program this are shown below;
Step 1: Press and hold
the PROG button. The
display below should
show with Monday
flashing
Step 2: Press the PROG
button. Prog 1 in the top
left of the display should
flash. This represents the
program number. Each
day has 6 programs.
PROGRAM 2
4°C
08.00
12.00
+
-
SELECT DAY TO SET PROGRAM
SELECT PROGRAM TO SET
SET TIME FOR PROGRAM
SET TEMPERATURE FOR PROGRAM
PROGRAM 3
PROGRAM 4
22°C
16°C
14.00
Step 3: Press the PROG
button. The time should
flash. Use the + and -
buttons to set the time
you want the heating to
switch on.
Step 4: Press the PROG
button. The temperature
should flash. Use the +
and - buttons to set the
temperature you want to
maintain.
Step 5: Press the PROG
button. Monday should
flash again.
Step 6: Press the PROG
button. Prog 1 in the top
left of the display should
flash. Use the + button
to increment this to Prog
2. (Note: you can cycle
between the different
programs using the + and
- buttons)
Step 7: Press the
PROG button. The time
should flash. Use the +
and - buttons to select
the time you want the
heating to switch off.
PROGRAM 5
22°C
16.00
22.00
Issue 003 - March 2024 | SmithsEP.co.uk | 7
PROGRAM 6
10°C
Advertisement
Table of Contents
