Keys Locking; Open Window Detection; Displaying The Time/Temperature - Swann Smith's HHPS01 User Manual

Keys locking

Press and hold TIME and TEMP together for 5
seconds. The display will show the symbol.
Repeat the step to unlock.

Open Window Detection

Ensuring you don't waste energy on heating
the outside world, the heater is equipped with
optional open / closed window detection. The
heater recognises sudden drops in temperature
when a window or a door is opened and turns
the heating off to save energy. When the window
is closed, the heater will automatically detect a
temperature rise, and switch itself back on. Once
enabled in the setup menu, the open window
detection is fully automatic and does not require
any human intervention to be activated. When
open window detection has been triggered, the
heat symbol will flash on/off as shown below.
Setting-up Open Window Detection
The system has been factory set to default time
and temperature values. If necessary, all values
can be adjusted. When the heating is on, open
window detection sensor will automatically switch
the heater off when it detects a fall in temperature
of 2°C in less than 10 minutes (this temperature
can be changed in menu 8 and time in menu 7). If
a temperature rise of 2°C in less than 30 seconds
is detected, the heater will switch itself back on
(this temperature can be changed in menu A and
time in menu 9).
6 | SmithsEP.co.uk | Issue 003 - March 2024

Displaying the time/temperature

The HHPS01 can display either the time & day
or the room temperature when in one of the 4
standard operating modes.
Press the TIME button to alternate between the
two options.
Setting the time and day
To set the time and day, follow the steps below;
Step 1: Press and hold
the TIME button for 5
seconds. The minutes
will flash. Use the + and
- buttons to adjust the
minutes.
Step 2: Press the TIME
button. The hours will
flash. Use the + and -
buttons to adjust the
hours.
Step 3: Press the TIME
button. The day will
flash. Use the + and -
buttons to change the
day. Once set, press the
TIME button to return to
the main screen.