Boost Mode; Manual Temperature Mode; Frost Protection Mode; Auto Mode - Swann Smith's HHPS01 User Manual

Hide thumbs Also See for Smith's HHPS01:
Table of Contents

Advertisement

Boost mode

The boost feature increases the room temperature
for 15 minutes.
To amend the set temperature when in BOOST
mode, activate the display and then press TEMP.
Next, use the + and - buttons to change the
temperature. Once the temperature is set, you
can leave the display to return to the main screen
and the settings will be saved. After 15 minutes,
the HHPS01 will return to the previous operating
mode.
Whilst in boost mode, activate the display and
press the PROG button to increase the boost
period. The boost period can be increased up to 4
hours. This will reset back to 15 minutes once you
exit boost mode.

Manual temperature mode

In MANUAL mode, the heater maintains a chosen
set temperature between 15°C and 35°C. To
amend the set temperature when in MANUAL
mode, activate the display and then press TEMP.
Next, use the + and - buttons to change the
temperature. Once the temperature is set, you can
leave the display to return to the main screen and
the settings will be saved.
When the room temperature reaches the set
temperature, the heating is disabled.

Frost protection mode

In FROST PROTECT mode, the heater maintains
a chosen set temperature between 4°C and 15°C.
To amend the set temperature when in FROST
PROTECT mode, activate the display and then
press TEMP. Next, use the + and - buttons to
change the temperature. Once the temperature
is set, you can leave the display to return to the
main screen and the settings will be saved.

Auto mode

In this mode, the HHPS01 will follow the week's
time / temperature program.
The temperature can be temporarily overridden
in AUTO mode by simply activating the display
and using the + and - buttons to set the new
temperature. The new set temperature will be
then maintained until the next program step.
Advance mode can be used to advance to the next
program. To do this, press PROG whilst in AUTO
mode. To clear advance mode, press PROG. The
program currently active is indicated in the top left
of the display.
Information on how to set up the program
schedule can be found on pages 7 & 8.

Heat symbol

Every time there is a demand for heat, the display
will show the heat icon.
Full heat
Issue 003 - March 2024 | SmithsEP.co.uk | 5
Half heat (RX only)

Advertisement

Table of Contents
loading

Table of Contents