Auto Repeat; Duplicating A Video Tape - Zenith TVBR2742Z Owner's Manual

AUTO REPEAT

1
Press the MENU button.
2
Press the SET + or – button to
select the AUTO REPEAT
option.
3
Press the ENTER button to select
the ON position.
4
Press the MENU button. If you press the PLAY button,
the tape will play over and over until the repeat mode is
canceled.
NOTE: To cancel repeat mode, follow above steps 1 and
2, then press the ENTER button to select the OFF
position. Press the MENU button to return to the
TV. The repeat function is canceled automatically
when the unit is switched off or the tape is ejected.

DUPLICATING A VIDEO TAPE

If you connect the TV/VCR to another VCR or
Camcorder, you can duplicate a previously recorded
tape. Make all connections before turning on the power.
1
Insert a blank cassette with the erase prevention tab
intact into the TV/VCR.
Insert a previously recorded cassette into the play-
back VCR or Camcorder.
2
Press the INPUT SEL. button
twice to select AUDIO/VIDEO
input position. The "LINE 2" will
appear on the screen.
NOTE: You can also use the rear
AUDIO/VIDEO IN jacks. Select "LINE 1" by pressing
the INPUT SEL. button.
3
Press the REC/OTR button on the remote control of
the TV/VCR, then press the PAUSE/STILL button.
4
Press the PLAY Button on the playback VCR, then
press the PAUSE/STILL button.
5
Press the PAUSE/STILL buttons on both units
simultaneously to begin the duplicating process.
NOTES: • It is recommended that the tape speed be set
to the SP mode on the TV/VCR for best result.
• Unauthorized recording of copyrighted
television programs, films, video cassettes
and other materials may infringe the rights of
copyright owners and be contrary to copyright
laws.
DUPLICATING A VIDEO TAPE
CONNECTION TO ANOTHER VCR
M E N U
TIMER REC SET
TV SET-UP
CH SET-UP
AUTO REPEAT ON OFF
SYSTEM SET-UP
+/–/ENTER/MENU
To VIDEO
CONNECTION TO CAMCORDER
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's instruc-
tions. A typical camcorder dubbing hookup is shown
below.
Playback
Camcorder
LINE 2
Playback VCR
To AUDIO
OUT
OUT
Audio/Video Cord (not supplied)
To AV Jack
Audio/Video Cord (not supplied)
Recording TV/VCR
To Audio In
To Video In
Recording TV/VCR
To Video/Audio In
23