To Set The Off Timer; Picture Control Adjustments - Zenith TVBR2742Z Owner's Manual

TO SET THE OFF TIMER

This feature allows you to have the TV/VCR turn
"OFF" automatically at a predetermined time. If you
program the OFF TIMER once, the TV/VCR will
automatically turn off at the same time everyday.
EXAMPLE: Turning off the TV at 11:30 PM.
1
Press the MENU button.
Press the SET + or – button to
select the TV SET-UP option, then
press the ENTER button.
2
Press the SET + or – button to
select the ON/OFF TIMER option,
then press the ENTER button.
3
Press the SET + or – button to
select the OFF TIMER option,
then press the ENTER button.

PICTURE CONTROL ADJUSTMENTS

Picture controls are factory preset but you can adjust
them individually as follows:
1
To display the picture adjustment
screen, press the MENU button.
Press the SET + or – button to
select the TV SET-UP option,
then press the ENTER button.
2
Press the SET + or – button to
select the PICTURE option, then
press the ENTER button.
BRIGHTNESS
Press the ENTER button until
"BRIGHTNESS" appears on the
screen, then press the SET + or –
button to adjust the brightness of
the picture. When the SET + button
is pressed, the darker portions of
the picture become lighter.
CONTRAST
Press the ENTER button until
"CONTRAST" appears on the
screen, then press the SET + or –
button to adjust the contrast of the
picture. Pictures look sharpest in
the daytime (bright light) by
increasing the contrast. At night
(dim light), the sharpest picture is obtained by reducing
the contrast.
NOTE: The CONTRAST default setting is set to maximum
at the factory.
18
4
5
M E N U
TIMER REC SET
6
TV SET-UP
CH SET-UP
AUTO REPEAT ON OFF
SYSTEM SET-UP
+/–/ENTER/MENU
TV SET-UP
NOTES: • If a station being viewed
V-CHIP SET
ON/OFF TIMER
PICTURE
+/–/ENTER/MENU
ON/OFF TIMER
ON TIMER
7:00AM CH012
MON-FRI SET
OFF TIMER
12:00AM CANCEL
+/–/ENTER/CANCEL/MENU
COLOR
Press the ENTER button until
M E N U
"COLOR" appears on the screen,
TIMER REC SET
TV SET-UP
then press the SET + or – button to
CH SET-UP
AUTO REPEAT ON OFF adjust the color intensity of the
SYSTEM SET-UP
picture. The control should be set
+/–/ENTER/MENU when colors appear normal in
intensity and brilliance.
TV SET-UP
TINT
V-CHIP SET
ON/OFF TIMER
Press the ENTER button until "TINT"
PICTURE
appears on the screen, then press
the SET + or – button to adjust the
+/–/ENTER/MENU
tint of the picture. This determines
how accurately the colors are
reproduced by the TV.
Adjusting the tint for natural facial tone is the best method of
obtaining accurate color reproduction of the entire picture.
SHARPNESS
BRIGHTNESS 0
Press the ENTER button until
+/–/ENTER/CANCEL/MENU
"SHARPNESS" appears on the
screen, then press the SET + or –
button to adjust the sharpness of the
picture.
CANCEL
Pressing the CANCEL button while making picture
adjustments will return all adjustments to the factory
CONTRAST 32
preset levels.
+/–/ENTER/CANCEL/MENU
NOTE: The On-screen display will disappear 6 seconds
Press the SET + or – button to set
the desired hour, then press the
ENTER button.
Press the SET + or – button to set
the desired minute, then press
the ENTER button.
Press the SET + or – button to
select the SET mode, then press
the MENU button repeatedly to
return to the normal screen.
stops broadcasting, the
TV will automatically shut
itself off after 15 minutes.
• To cancel OFF TIMER, follow
above steps 1-5, then press
the SET + or – button to select the CANCEL.
Press the MENU button to return to the normal
screen.
• To confirm the ON/OFF TIMER:
Press the PROG. button twice to indicate the
programs on the screen.
after finishing an adjustment or by pressing the
MENU button three times. The settings can only be
adjusted when they are displayed on the TV screen.
ON/OFF TIMER
ON TIMER
7:00AM CH012
MON-FRI SET
OFF TIMER
11:00PM CANCEL
+/–/ENTER/CANCEL/MENU
ON/OFF TIMER
ON TIMER
7:00AM CH012
MON-FRI SET
OFF TIMER
11:30PM CANCEL
+/–/ENTER/CANCEL/MENU
ON/OFF TIMER
ON TIMER
7:00AM CH012
MON-FRI SET
OFF TIMER
11:30PM SET
+/–/ENTER/CANCEL/MENU
COLOR 0
+/–/ENTER/CANCEL/MENU
TINT 0
+/–/ENTER/CANCEL/MENU
SHARPNESS 0
+/–/ENTER/CANCEL/MENU