Table of Contents
Advertisement
LOCATION OF CONTROLS
FRONT
1
2
3
4
5
9
10
11
12
FRONT:
1. Cassette Loading Slot - To insert or remove a
video tape.
2. POWER Button - Press to turn the TV/VCR on or off.
3. POWER Indicator - Light when the power is turned
on.
4. T.REC Indicator - This lights when the TIMER REC
button is pressed.
5. REC/OTR Indicator - Lights when the TV/VCR is
recording.
6. PLAY Button - Press to play a prerecorded tape.
7. REW (Rewind) Button - In the Stop mode, this but-
ton rapidly winds the tape backwards. In the Play
mode, this button activates reverse search.
8. PHONES Jack - Plug monaural headphones or an
earphone with an 1/8" miniplug into this jack for private
listening.
9. Remote Sensor - Signals from the Remote Control
are received here.
10. REC/OTR Button - Press once to start normal
recording. Additional presses activate Instant Timer
Recording.
11. VOLUME
/
Buttons - Press to raise or lower
the volume of the sound.
6
7
8
13
14
15
DESCRIPTION OF CONTROLS
REAR
16
17
12. CHANNEL
/
Buttons - Press to select a
channel for viewing or recording.
13. STOP/EJECT Button - Press once to stop the tape
in any mode. Press again to eject the tape.
14. F.FWD (Fast Forward) Button - In the Stop mode,
this button rapidly winds the tape forward. In the
Play mode, this button activates forward search.
15. AUDIO/VIDEO IN (LINE 2) Jacks - Audio and video
signal cables from an external source can be
connected here.
REAR:
16. VHF/UHF Antenna Jack - Connect the 75 ohm
coaxial cable from the antenna or Cable TV service
to this jack.
17. AUDIO/VIDEO OUT Jacks - Used to output audio
and video signals to a TV, amplifier or VCR.
18. AUDIO/VIDEO IN (LINE 1) Jacks - Audio and
video signal cables from an external source can be
connected here.
19. AC Power Cord - Connect to a 120V, 60Hz outlet.
18
19
7
Advertisement
Table of Contents
