Auto Return - Zenith TVSB1340V Operating Manual & Warranty

TOCORRECTA PROGRAM
• While setting a program; press the REW/I
button to go back one step and enter the correct
numbers using the PLAY/A or STOP/V button.
• After setting a program;
1) Press the POWER button•
2) Repeat steps [1] - [2] on page 29.
3) Press the F.FWD/_- button (or press the
REW/_I button to go back one step) until the
part you want to correct begins flashing, then
make the changes pressing the PLAY/A or
STOP/T button.
4) Press the POWER button to set automatic
timer recording
....-_, ! ,[_MFI;
,2{ - i -,
• After setting a program;
1) Press the POWER button•
2) Repeat steps [1] ~ [2] on page 29 and select
a program you want to cancel.
3) Press the COUNTER RESET button.
4) Press the MENU button to return to TV mode.
• While recording is in progress;
1) Press the POWER button.
2) Press the STOP/EJECT button on the
TV/VCR.
• _ •f'l i I ,
TO CHECK T 4E BE.• z_'_.ENDFIME
1) Press the POWER button so that the REC
indicator goes off.
2) Press the MENU button.
3) Confirm "TIMER PROGRAMMING" is pointed
to.
4) Press the F.FWD/_- button. The details of
programs appear on the TV screen.
5) Press the MENU button to return to TV mode.
AUTO TIMER RECORDING REMINDERS:
• Make sure the channel you want to record is
properly set in advance•
• It is not necessary to press the RECORD
button for timer recording.
• Recording begins automatically at the Start
time.
• If you are recording using a Timer mode, you
cannot operate the unit manually.
• The erase-prevention tab on the cassette
must be in place (or you must put tape over
the hole).
• If the erase-prevention tab is removed, the
cassette will be ejected when the POWER
button is pressed to off.
• If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode
immediately, and the tape will be ejected.
With this function, after timer recording is
finished, the tape will automatically rewind to the
start of the recorded program(s).
• Use the remote control for this procedure.
Press the MENU button.
Press the PLAY/A or
STOP/V button to point to
"USER'S SET UP".
Then, press the F.FWD4_
button.
•MENU
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USERS SET Up
V CNIP SET UP
LANGUAGE [ENGLISH I
CAPTION _OFF I
ZERO RETURN
TIME SEARCH
INDEX SEARCH
Press the PLAY/A or
STOP/'#' button to point to
"AUTO RETURN".
Press the F.FWD4_ or
REW/_I button until [ON]
appears.
USERSSETUP
RENTAL IOFF}
REPEA?£LAY _
_AUTO R£TURN _ NJ.
When all the timer recordings are completed, the
TVNCR will rewind to the beginning of the
recorded program(s).
NOTE:
• If you press the POWER button while tape is
rewinding, the Auto Return will stop.
t2t_r t} t
Press the PLAY button.
TC CANCEL [}'_£ AUTO RETURN MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/I_ or REW/_I button.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
- 31 - EN
9F06