Subscribe to Our Youtube Channel
Related Manuals for RELACART WAM-432
Summary of Contents for RELACART WAM-432
- Page 1 WAM-432 TRUE DIVERSITY DIGITAL WIRELESS AUTOMATIC MIXER Installation and Operation...
-
Page 2: Table Of Contents
Contents 01 Safety Operation and Notice ..................... Thank you for choosing a RELACART professional wireless automatic mixer system. You 02 System Performance Feature ....................have joined thousands of other satisfied customers. Our years of professional experience of 03 Mixer Installation Method ...................... -
Page 3: Safety Operation And Notice
” indicates that dangerous voltage constituting a risk of electric shock is present within this unit. noise automatically and avoid howling effectively. 21. All Relacart products will be afforded one year free maintenance except for man-made damage, such as: — the device is damaged by man-made factors. -
Page 4: Mixer Installation Method
· Cascaded connection function, can daisy chain up to 8 pieces of WAM-432, 32 microphone dele- 3ft (1m). away from a wall or metal surface to minimize reflections. -
Page 5: Packing List
Packing List Front Panel Function Introduction Wireless automatic mixer *1 1 meter audio cable *1 Wireless transmitter 60cm coaxial-cable * 2 BNC Antenna *2 RJ-11 Telephone wire * 1 External power adapter * 1 1.5V AA battery *8 Installation and operation * 1 M - L E V E L 888.888MHz CH00... -
Page 6: Rear Panel Function Introduction
RS-232 interface: Connect automatic video tracking system VTS-2000 or the control system. a maximum of 4 bar segments. When it leaves 1 bar segment, the batteries should be Serial data link port (DATA LINK): When multiple WAM-432 receivers are working, RELACART replaced immediately. - Page 7 Bodypack transmitter (UT-222) Infrared data receiving window (IR): Synchronization of transmitters via IR interface from receiver. Battery Cover: Unscrew it can reveal the battery compartment; When installing, replacing or setting the infrared frequency, the battery cover must be opened. RF power switch: HI is 50 mW, LO is 30 mW. Battery Compartment: Insert 2 fresh 1.5V AA batteries.
-
Page 8: Boundary Microphone (Ub-222)
Boundary microphone (UB-222) 3.5mm crimp type antenna: For transmitting a bodypack radio carrier. Power Button/Mute Button: Press the power button to turn on the transmitter, press the power button 1.5 second enter the mute status, press one more time to close the mute function. Long press 3 seconds to turn off the transmitter. - Page 9 Gooseneck conference microphone (UD-222) Power Button/Mute Button: Press the power button to turn on the transmitter, press the power button 1.5 second enter the mute status, press one more time to close the mute function. Long press 3 seconds to turn off the transmitter. Infrared data receiving window (IR): Synchronization of transmitters via IR interface from receiver.
-
Page 10: System Setup And Operation
System Setup and Operation LCD display introductions System Main Menu Settings Keep the “CONTROL” knob pressed for approx. 3 seconds to enter the setting menu. Turn the Main display: “CONTROL” knob to browse the menu items and press the knob to select the desired function. Turn the knob to make your settings and press the knob to confirm them. - Page 11 3. To enter the main menu mode: Press and hold the “CONTROL” knob 3 seconds to enter the (3) Priority: Set the microphone at priority. Select “Priority”, then press CONTROL knob to edit mode. rotate this knob once to select and set mode: Output Level, Speaker, Priority, enter edit mode, rotate this knob, to choose the priority channel, if there are two Threshold, Pilot...
- Page 12 (5) Pilot: Activates/deactivates the pilot tone evaluation. Select “Pilot”, then press CONTROL (7) Language: Changes the menu language. Select “Language”, then press CONTROL knob to knob to enter edit mode, rotate this knob, the LCD will display “ON” or “OFF”, if stopping on enter edit mode, rotate this knob, to select “...
-
Page 13: Channel Menu Settings
(9) Reset: Reset to default settings. Select “Reset”, then press CONTROL knob to enter edit Channel Menu Settings mode, rotate this knob, the LCD will display “Yes” or “No”, if stopping on “Yes”, This menu Shortly press a channel button CH1 to CH4 to enter the corresponding channel menu. Turn the item resets the mixer to its default settings;... -
Page 14: Mixer Equipment Installation
Mixer Equipment Installation Antenna Sync: Infrared data transmitting. Let the transmitter’s IR window face to “SYNC” window, press “CONTROL” to receive the data signal from the receiver. The indication >>>>>> will pulsate during IR transmission. SY NC SYNC SYNC (4) SQELCH: Stop at “SQELCH”, then press “CONTROL” knob, the squelch level is adjustable in the 05dB steps, providing a 05dB to 35dB range. -
Page 15: Transmitter Battery Installation
Transmitter Battery Installation OPEN, Toggle Switch... -
Page 16: User-Friendly Steps
User-friendly steps 1. After connecting the antenna and the power adapter, turn on the receiver by pressing the 3. Press the corresponding channel button, turn the “CONTROL” encoder clockwise or power button (“ ” symbol), the display and power indicator are all on. (As shown below) counterclockwise to scroll the setting menu, and short press the “CONTROL”... - Page 17 b. Press the encoder into the automatic search interface, as shown: 4. Automatic search to a clean frequency, counterclockwise rotation of the encoder to the “SYNC” interface. A F S S YNC SYNC Align the transmitter infrared frequency window with the receiver IR infrared frequency window, press the encoder to determine the frequency, When the RF signal is on, the microphone of the c.
-
Page 18: System Applications Connection Diagram
System Applications Connection Diagram Technical Specification R-22AU R-22AU WAM-432 Wireless Automatic Mixer Main Frame Size : EIA standard 1U Frequency Stability : Carrier Frequency Range : 521.25MHz ~ 936.85MHz R-14D Modulation Mode : Sensitivity: 5dBu, S/N >60dB at 25 deviation... - Page 19 UH-222 Handheld Microphone UT-222 Bodypack Transmitter Carrier Frequency Range: 521.25MHz ~ 936.85MHz Carrier Frequency Range: 521.25MHz ~ 936.85MHz PLL Synthesized PLL Synthesized Oscillation: Oscillation: Harmonic Radiation: <45dBm Harmonic Radiation: <45dBm Bandwidth: 134MHz (It depends on the region) Bandwidth: 134MHz (It depends on the region) Max.
- Page 20 UB-222 Boundary Microphone UD-222 Desktop Gooseneck Microphone Carrier Frequency Range: 521.25MHz ~ 936.85MHz Carrier Frequency Range: 521.25MHz ~ 936.85MHz PLL Synthesized Modulation: Oscillation: Harmonic Radiation: <45dBm Harmonic Radiation: <50dBm Bandwidth: 134MHz (It depends on the region) Bandwidth: 134MHz (It depends on the region) Max.
Need help?
Do you have a question about the WAM-432 and is the answer not in the manual?
Questions and answers