ECG ERT 10851 WE Instruction Manual page 8

Changing the door opening side
Phillips screwdriver
Ratchet with extension size 5/16" (8
mm)
1. Turn off the refrigerator and remove everything from the door shelves.
2. Secure the door with adhesive tape.
3. Remove the left opening cover of the upper hinge, the upper hinge cover (on the right) and unscrew the
upper hinge bolts, then remove the upper hinge. Hold the door in vertical position all the time and make
sure it does not fall.
4. Remove the door, remove the lower hinge and the adjustable leg. Then install the lower hinge on the left
side of the freezer and the adjustable leg on the right side.
Bottom hinge (different version)
5. Install the door on the lower hinge and check that the seal is sealing properly and that the door position is
correct. Install the upper left hinge and attach hinge cover.
8
Tools needed to change the door opening side
Small flat screwdriver, scraper
Adhesive tape
Upper hinge cover
Upper hinge
Adjustable leg Bottom hinge