Table of Contents
Advertisement
19.2 Removing the door panes
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
▶
Do not use any harsh or abrasive cleaners or sharp
metal scrapers to clean the glass on the oven door,
as they may scratch the surface.
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶
Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
Requirement: The door cover has been removed.
1.
Undo and remove the screws on the left and right of
the appliance door.
2.
Place a folded-up tea towel in the appliance door.
3.
Close the appliance door.
4.
Pull the front pane up and out.
5.
Place the front pane down on a flat surface with the
door handle facing down.
6.
WARNING ‒ Risk of serious harm to health!
If the screws are undone, the safety of the appliance
can no longer be guaranteed. Microwave energy
may escape.
▶
Never undo the screws.
Never unscrew the four black screws on the frame.
19.3 Fitting the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶
Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
1.
Attach the front pane downwards into the left- and
right-hand retainers
2.
Push the front pane to the appliance until the left-
and right-hand hook
3.
Push the front pane in at the bottom
hear it click into place.
4.
Open the appliance door slightly and remove the
tea towel.
5.
Screw both screws back in on the left and right of
the appliance door.
6.
Put the door cover in position and push down on it
until you hear it click into place.
7.
Close the appliance door.
Note: Do not use the cooking compartment again until
the door panes have been correctly fitted.
Appliance door en
.
is opposite the support
until you
.
25
Advertisement
Table of Contents
