Table of Contents
Advertisement
en Dishes
¡ Circulated air grilling
¡ Grill, large area
¡ Grill, small area
Possible microwave power settings include:
¡ 90 watts
¡ 180 watts
¡ 360 watts
Setting the microwave combination
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡
¡ → "Cookware and accessories with microwave",
Page 16
1.
Press
.
2.
Select "Microwave combination" in the operating
modes menu.
a "Type of heating", "Temperature", "Microwave output
setting" and "Cooking time" recommendations are
displayed.
3.
Press the required function.
4.
Set the desired value with the rotary selector.
5.
Press
to start the operation.
a The appliance starts to heat and the time starts to
count down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. A notification appears in the status bar.
6.
Once the cooking time has elapsed:
Press
to silence the audible signal manu-
‒
ally.
12 Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
12.1 Cookware
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. two thirds of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
Note: For some dishes, the appliance switches on the
microwave. A notification appears in the display stating
that you should use cookware that is suitable for mi-
crowave use.
→ "Cookware and accessories with microwave",
Page 16
18
If necessary, set another combination.
‒
When the food is ready, press
‒
appliance off.
Changing the temperature
Once the MicroCombi operation has started, you can
change the temperature directly.
1.
Press the temperature.
2.
Use the rotary selector to change the temperature.
a The change is applied immediately.
Changing the cooking time
Once the MicroCombi operation has started, you can
change the cooking time at any time.
1.
Press "Cooking time".
2.
Use the rotary selector to change the cooking time.
a The change is applied immediately.
Changing the microwave output setting
Once the MicroCombi operation has started, you can
change the microwave output setting directly.
1.
Press the microwave output setting.
2.
Use the rotary selector to adjust the microwave out-
put setting.
a The change is applied immediately.
Changing the type of heating
If you change the type of heating, the temperature also
changes and the cooking time is reset.
1.
Press
to pause operation.
2.
Press the types of heating.
3.
Use the rotary selector to change the type of heat-
ing.
4.
Press
to resume operation.
12.2 Settings for the dishes
To make the dishes perfectly, the appliance uses differ-
ent settings.
Note: The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food. Use frozen food straight from the freezer.
Tips and information about the settings
If you set a dish, the display shows relevant information
for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
When this time is reached, a signal sounds.
To call up the information, press "Tip" or
notes are displayed automatically.
Programmes
The ideal type of heating, temperature and cooking
time are preset for programmes.
In order to obtain an optimal cooking result, you must
also set the weight. Unless otherwise indicated, set the
total weight for your dish. You can set the weight only
in the intended range.
to switch the
. Some
Advertisement
Table of Contents
