Components Installation - Stiga A 500 Instruction Manual

4.5.

COMPONENTS INSTALLATION

ELECTRICAL HAZARD:
Only use the battery charger
and power supply provided by
the manufacturer. Improper use
may cause electric shock and\or
overheating.
ELECTRICAL HAZARD:
A socket must have been
prepared near the installation
area to connect it to electricity.
Make sure that connection
to the power supply network
conforms to laws in force of the
Country where it is used.
CAUTION:
Danger of cutting hands.
GLOVES OBLIGATION:
Use protective gloves to avoid
cutting your hands.
EN
CAUTION:
The circuit provided must be
protected by a residual current
device (RCD) with an activation
current not exceeding 30 mA.
ELECTRICAL HAZARD:
Connect the power supply only
at the end of all the installation
operations. If necessary during
the installation, turn off the
general power supply.
CAUTION:
Danger of dust in the eyes.
GLASSES OBLIGATION:
Use safety glasses to avoid the
danger of dust in the eyes.
4. INSTALLATION
29