Zenith D27B48T Operating Manual & Warranty page 55

Trouble Shooting continued
Weak or no Stereo Sound
when using a stereo VCR.
The PIP inset is black or
lacks contrast when VIDEO 1
is the PIP source.
The PIP inset is "snow" when
the source is Antenna/Cable,
Video 1, or Video 2.
There is no picture in the
PIP inset when using VIDEO 1
for the PIP and Antenna/Cable
for the main picture.
With no key presses,
on-screen menus continue
to appear.
Parental Control doesn't work.
Can't watch TV or VCR.
Programs with a rating of PG-13, R,
NC-17, and X do not appear.
Can't view TV-PG program.
TV turns itself off, or on by itself.
206-3695-0
• Check to see if all the connections are secure.
• Look in the Audio mode menu to see if all the settings are correct.
• You might want to adjust the PIP picture settings under the PIP menu.
• Check that all the wires are connected properly.
• PIP source turned on?
• Look to see if the TV/VCR button on your VCR has the TV selected.
• Look to see if the TV/VCR button on your VCR has the TV selected.
• EZ Demo feature is operating. Turn EZ Demo off in the Special Features menu.
• Has Timer expired? Lock On/Off turned Off? No hours set?
• Is Parental Control block on? Are Aux inputs blocked? Do you know the password to
unblock Parental Control?
• Is Parental Control set to block programs with those ratings.
• Is PG set to be blocked in Parental Control? Reset restrictions to PG-13, then PG pro
grams will appear.
• Was Sleep Timer set to turn TV off.
• Is the On/Off Timer set to turn TV on and off at preset times?
• Power Failure?
P A G E 5 5