Table of Contents
Advertisement
Overview
1 On/off button
2 On/off button, remote control
3 On/off indicator, electronic
4 Power level adjustment, remote control
5 Power level indicator, electronic
6 HEPA filter indicator, electronic
7 Dust bag indicator, electronic
8 Manual handle
9 Remote handle
10 Cable rewind button
11 Parking bracket
12 Open/close button, dust container
13 Dust bag indicator (Classic models)
14 Dust bag
15 Pre-filter
16 HEPA filter
17 Open/close button, accessory lid
18 Crevice nozzle
19 Upholstery nozzle
20 Brush nozzle
21 Hard floor nozzle (not standard on all models)
22 Combination nozzle
23 Turbo nozzle (not standard on all models)
24 Mini Turbo nozzle (not standard on all models)
25 Carrying handle
Display symbols on carrying handle
(not standard on all models)
The dust bag is full and needs to be
changed.
The HEPA filter needs to be changed.
Flashing indicator - early warning, the
HEPA filter soon needs to be changed.
Machine ON.
Indicates current power level.
Specifications and details are subject to change without
prior notice.
Instructions for use
Before using the machine make sure that the voltage
shown on the rating plate underneath the machine
corresponds with the mains voltage.
The machine is supplied with dust bag and pre-filter.
x
Numbers
refer to illustrations.
Start and stop
Start
Pull out the electric cable and plug the machine to a
wall socket.
On/off:
Option 1: Use on/off on machine
Option 2: Use on/off on the remote control (bend end)
- only superior model.
Power can be adjusted between 5 power levels. Cur-
rent setting is shown on the carrying handle of the
machine (only for Comfort/Superior). On the Superior
model the power setting can also be adjusted on the
remote control (hose handle).
Stop
Turn off the machine and unplug. Unplug by grasping
the plug, not by pulling on the electric cable.
Connecting hose, tube and nozzles
1
1. Insert the hose connector into the suction inlet until
it engages by a "click" sound.
2. Connect the hose handle to the tube and twist until
they engage with a click.
3. Connect the tube and nozzle and twist until they
engage with a click.
4. The tube is telescopic and can be adjusted to your
height. Pull out the adjusting handle to extend the
tube, and pull back to shorten to desired length.
Disengage
• Disengage the nozzle from the tube by pressing the
button.
• Disengage the hose handle from the tube by pres-
sing the button.
• To remove the hose connection from the suction in-
let, press button and disengage the hose.
Change of dust bag and filters
The size and quality of the dust bag and filters affect the
machine efficiency. Use of non original dust bags or non
original filters can cause restricted air flow which may
lead to machine overload. Using non-original dust bag
or filters will void the warranty.
The machine is a completely air tight construction. This
ensures that air and dirt going into the machine, can
only get out through the HEPA filter in the end.
Changing the dust bag
2
The dust bag indicator shows when to change the
dust bag.
Always use original dust bags.
1. Open the lid by pushing at the latch release in the
direction of the arrows.
2. Remove dust bag holder from dust compartment.
Advertisement
Table of Contents
