Table of Contents
Advertisement
3. Remove dust bag from holder. The dust bag can be
closed by pulling the collar handle.
4. Insert the new dust bag by guiding the collar into the
tracks of the bag holder.
5. Place the bag holder in the dust compartment. Check
that the dust bag is correctly fitted into dust compart-
ment.
Changing the pre-filter
3
The pre-filter protects the motor by absorbing micro-
particles that the dust bag can not keep. Change the
pre-filter once a year. The pre-filter is located behind
the dust bag. Always use original filters.
1. Open the lid by pulling up at the latch release.
2. Remove bag holder with bag from dust compart-
ment.
3. Open pre-filter hatch by pulling handle.
4. Take out the pre-filter.
5. Fit the new pre-filter (ensure that the text is readable)
and close the pre-filter hatch.
6. Place the bag holder in the dust compartment. Check
that the dust bag is correctly fitted into dust compart-
ment.
Changing the HEPA filter
4
The HEPA filter cleans the exhaust air from micro par-
ticles the dust bag can not keep. The HEPA filter can
not be brushed or washed clean. Comfort and Superior
models have a HEPA filter indicator that shows when
to change the HEPA filter. For Classic models, change
HEPA filter for every 5th dust bag change. Always use
original dust bags and filters.
1. Open the lid on the back of the machine by pulling
the tap.
2. Take out the HEPA filter.
3. Insert the new HEPA filter. Check that the HEPA filter
is correctly fitted. NB: Only touch the filter plastic
frame.
4. Put the lid back and close by pushing the tap in. NB:
Assure lid is fully closed.
Adjust the suction power
All models have a five step adjustment on the carrying
handle.The suction power can also be adjusted on the
hose handle of the Superior models.
Power
Power
regulation -
regulation +
Power
Power
regulation +
regulation -
Current power
level
Current level is shown on the carrying handle on
Superior/Comfort models.
Tip: Adjust smaller suction power to reduce noise and
pull force.
Battery replacement in hose handle:
1. Open the lid of the battery holder
by sliding the lid towards the front
of the hose handle.
2. Replace the used batteries with
two new ones, type 1.5V AAA.
Make sure the polarity of the
batteries is placed correct at the
bracket.
3. Slide the battery lid back until you
hear a click.
Parking the tube and nozzle
5
There are two grooves for parking. One located on the
underside of the machine to use when machine stands
on the back. The other on the back of the machine, to
be used when the machine is standing on its wheels.
Thermal fuse
The machine is fitted with a thermal fuse, which pre-
vents the machine from overheating. If the thermal fuse
blow, the machine automatically switches off the motor
and must cool before it can be started again.
Restart
1. Turn off the machine and unplug from the wall
socket.
2. Ensure that nothing blocks the air flow through hose
handle, hose, tube, nozzle, dust bag or filters.
3. Let the machine cool.
4. Plug in the machine again and push start button.
The machine will not start until cool enough. If the
machine does not start turn it off and unplug. Try
again in a while.
WARNING
When activating the automatic cable rewind, care must
be taken as the plug at the end of the electric cable can
swing during the last part of the rewinding. It is recom-
mended that you hold on to the plug while rewinding
Cleaning tips
6
Crevice nozzle
Use the crevice nozzle for narrow spaces
7
Upholstery nozzle
Use the upholstery nozzle for upholstered furniture
Advertisement
Table of Contents
