Related Manuals for Nilfisk-Advance S3B N1
Summary of Contents for Nilfisk-Advance S3B N1
- Page 1 S3B N1 INSTRUCTIONS MANUAL MANUEL D’INSTRUCTIONS Instructions for use MANUAL DE INSTRUCCIONES EN -US English-American C434-US-F-E French EDITION 01/2017 Spanish...
-
Page 3: Table Of Contents
S3B N1 Translation of original instructions Table of contents Instructions for use ......................2 Operator’s safety ..........................2 Grounding instructions ........................2 Proper uses ............................. 3 General recommendations ......................3 Vacuum cleaner description...................4 Vacuum Cleaner Parts and Labels ....................4 Optional kits ............................. 4 Packing and unpacking ........................ -
Page 4: Instructions For Use
S3B N1 Instructions for use Read the operating instructions and comply with the important safety recommendations identified by the word WARNING! Operator’s safety ■ Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. -
Page 5: Proper Uses
S3B N1 General information for using the vacuum Versions and variations cleaner Versions Use the vacuum cleaner in accordance with the laws in force in the country where it is used. Optional Besides the operating instructions and the laws in force in... -
Page 6: Vacuum Cleaner Description
S3B N1 Vacuum cleaner description Vacuum Cleaner Parts and Labels Optional kits Figure 1 Please contact the sales personnel for information on optionals. Identification plate which includes: Code of the Model, Technical Specifications (see table Instructions for installing the optional are included in the on page 6), Serial No., Year of manufacture, Nominal... -
Page 7: Unpacking, Moving, Use And Storage
S3B N1 Unpacking, moving, use and storage Extensions Operate on flat, horizontal surfaces. If an extension cable is used, make sure it is suitable for the power input and protection degree of the vacuum cleaner. The load-bearing capacity of the surface the vacuum cleaner is placed on must be suitable for bearing its weight. -
Page 8: Wet And Dry Applications
S3B N1 Wet and dry applications Maintenance and repairs [ NOTE ] WARNING! The supplied filters and the bag (if applicable) must be Disconnect the vacuum cleaner from its power installed correctly. source before cleaning, servicing, replacing parts or converting it to another version/variant, the plug must WARNING! be disconnected from the socket. -
Page 9: Technical Specifications
S3B N1 Technical specifications S3B N1 Parameter Units 100L Voltage @ 60Hz Volts Type of Power No. of phases Power, max Current Draw, rated Amps 15.80 Max vacuum in. (mm) H 84.65 (2150) Airflow, max without hose and reduction CFM (L/min) -
Page 10: Controls And Indicators
S3B N1 Controls and indicators Emptying the dust container Figure 4 WARNING! Motor start/stop switch Power indicator ■ Before proceeding with these operations, turn the Manual filter shaker knob vacuum cleaner off and disconnect the plug from the power socket. -
Page 11: Maintenance, Cleaning And Decontamination
S3B N1 Maintenance, cleaning and Primary filter replacement decontamination Figure 8 Before proceeding with these operations, turn off the vacuum cleaner and remove the plug from the power socket. WARNING! To guarantee the safety level of the vacuum cleaner, ■... -
Page 12: Hepa Filter Assembly Or Replacement
S3B N1 HEPA filter assembly or replacement Tightness inspection Hoses check WARNING! Make sure the suction hoses (Fig. 10) are in a good condition Do not use the HEPA filter again after having removed and correctly fixed. it from the vacuum cleaner. -
Page 13: Recommended Spare Parts
S3B N1 Recommended spare parts The following is a list of spare parts that should be kept ready at hand in order to speed up maintenance operations. Refer to the manufacturer’s spare parts catalogue when ordering spare parts. Model Description... -
Page 14: Troubleshooting
S3B N1 Troubleshooting Problem Cause Remedy The vacuum cleaner does not start Lack of power supply Check for power at the socket. Check the condition of the socket and the cable. Ask for assistance to be performed by a qualified manufacturer’s technician. -
Page 15: Warranty
S3B N1 WARRANTY Nilfisk warrants that its equipment will be free of defects in workmanship or material for a period of two years from the date of delivery. If the vacuum fails to meet these warranty standards, Nilfisk shall, upon notification within such time period, correct such non-conformity, at its option, either by repairing any defective part or parts, or by replacing a part or parts, provided that the equipment is returned to an authorized Nilfisk service facility. - Page 16 S2B - S3B 13 A 07AJ814 3000 W Kg 71 Ref.No: 4010300258 50/60 Hz ME77 01/2017 C352...
- Page 17 S2B - S3B C352 01/2017...
- Page 18 S2B - S3B 01/2017 C352...
- Page 19 S2B - S3B C352 01/2017...
- Page 20 S2B - S3B 01/2017 C352...
- Page 21 S2B - S3B 1 ˜ 1 ˜ 1 ˜ C352 01/2017...
- Page 22 S2B - S3B 01/2017 C352...
- Page 24 Nilfisk, Inc. Industrial Vacuum Division 740 Hemlock Rd., Suite 100 Nilfisk SpA a socio unico Morgantown, PA 19543 Via Porrettana, 1991 - 41059 Zocca Phone: (800) 645-3475 Modena - Italy Fax: (610) 286-7350 Tel. +39 059 9730000 - Fax +39 059 9730065 industrial-vacuum@nilfisk.com www.nilfiskindustrialvacuums.com www.nilfisk.com...