Explicit Message
24
Data to be accessed
Alarm setting
(alarm level)
Alarm type
Alarm setpoint
Alarm delay setting
(channel type)
Alarm delay setting
(channel number)
Alarm delay
Data Type
For a PLC, you can specify the type of read or write data using a file number or tag name
in a command. However, the data type is fixed to INT16 for commands "PLC2 Unprotected
Read/Write" and "PLC5 Word Range Read/Write."
Tag name
Supplementary Information
Data type
INT32
dint[13052]
1 to 4: Alarm level
dint[13053]
0: OFF
1: High limit alarm
2: Low limit alarm
3: High limit on rate-of-
change alarm
4: Low limit on rate-of-
change alarm
5: Delay high limit alarm
6: Delay low limit alarm
7: Deviation high limit alarm
8: Deviation low limit alarm
dint[13054]
Alarm setpoint
dint[13060]
1: I/O channel
2: Math channel
3: Communication channel
dint[13061]
I/O channel: 1 to 6932
Math channel: 1 to 200
Communication channel: 1
to 500
dint[13062]
Alarm delay seconds
IM 04L51B01-18EN