Intended Use; Technical Data; Before Starting The Equipment - EINHELL 4600015 Operating Instructions Manual

Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.

3. Intended use

The chain saw is intended for felling small trees
and for cutting trunks, branches, wooden beams,
boards etc. and can be used for cross cuts and
longitudinal cuts. It is not suitable for cutting any
materials other than wood.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
Anl_Fortexxa_18_30_SPK7_USA.indb 16 Anl_Fortexxa_18_30_SPK7_USA.indb 16
EN

4. Technical data

Motor power supply: ............................ 18V
No load speed RPM: .................... Level 1: 0-3500
..................................................... Level 2: 0-4500
Bar length:....................................................... 12"
Chain pitch: ......................................................⅜ "
Chain Gauge: ............................................. 0.043"
Saw chain: ...........Oregon
Bar: ..................................Oregon
Cutting speed at rated RPM: ..................350.4 ips
Oil tank capacity: ........................ 5.4 fl oz (160 ml)
Weight (Tool only): .....................................8.8 lbs
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.

5. Before starting the equipment

Warning!
Always remove the battery before making
adjustments to the equipment.
Danger! Do not fi t the battery until the chain saw
has been fully assembled and the chain tension
has been set. Always wear protective gloves
when working on the chain saw to protect yourself
against injury.
5.1 Assembly of the bar and the saw chain
•
Carefully unpack all parts and check that they
are complete (Fig. 2-3).
•
Undo the chain tension lock knob of the chain
wheel cover (Fig. 4).
•
Take off the chain wheel cover (Fig. 5).
•
Lay the chain as shown in the groove which
runs around the bar (Fig. 6/See arrow).
•
Insert the bar and chain as shown in the
mounting in the chain saw. At the same time
guide the chain around the chain sprocket
- 16 -
90PX045X / 45 Teeth
®
124MLEA041
®
22.08.2023 14:48:48 22.08.2023 14:48:48