Table of Contents
Advertisement
TP CHASSIS / TELEVISION
place, this option should NOT be cloned. User Set enables us to transfer user
settings (sound, brightness, TV language and etc.).
Start Cloning option starts the cloning process. Whereas TV to USB takes little time,
USB to TV causes a short interruption of TV imaging. When TV automatically restarts
after installation, its means cloning is completed.
NOTES:
When cloning, you should ensure that both product codes are the same. During both
TV to USB cloning and USB to TV cloning, "ALL" should be selected as Copy item.
When cloning between different product codes, only "Channel/Video Set." section
should be copied. After copying, picture settings of TV may show some differences.
TV should be delivered to the customer after those settings are checked. On User
menu, go to "Source Settings" => "Program Table" (don't select). Press the keys 4, 6,
5, 8; and cloning menu will be displayed.
Bootcode Configuration
In the products with TP-chassis, Boot code should be updated before software
updating. Boot code update is performed through the steps below. When this menu is
highlighted, enter the menu with OK button on the remote control.
Step 1:
Please copy mboot.bin file into USB memory. (If the memory contains more than one
partition, copy the file into the first partition.)
Step 2:
Insert USB memory to the USB socket on the side of TV.
Step 3:
Wait for 10 seconds for USB memory to be automatically mounted.
77
September 2011
Advertisement
Table of Contents
