Wireless Network Connection; Wireless Network Settings; Auto Wireless Network Connection - Grundig 22VLE4300 BA Service Manual

Tp chassis / television

Table of Contents

TP CHASSIS / TELEVISION

10 Press » « (green) button to make sure that the network connection is established

with the current settings.

– »Testing ... Please wait« message will be displayed and if it is connected

successfully, »Connection to Gateway : Success«, »Internet Connection: Success«

message will be displayed.

11 Press »i« to end the setting.

5.3.5. Wireless Network Connection

Television includes a built-in Wireless WiFi Adapter to connect it to wireless network.

Note: Apart from the built-in WiFi adapter on TV, external USB WiFi adapter can be

connected to »USB1« and »USB2 (HDD)« inputs.

A In automatic connection, all data regarding connection settings (»IP Address«,

»Netmask «, »Gateway« and »DNS«) are obtained from modem automatically,

except for Access Point Selection.

B In manual connection, all data regarding connection settings (»IP Address«,

»Netmask «, »Gateway« and »DNS«) should be manually configured.

Most of the home networks are Dynamic networks. If you have a dynamic network,

you must use a DSL modem that supports DHCP. Modems and IP sharers that

support DHCP obtain the »DNS« values required for »IP Address«, »Netmask«,

»Gateway« and internet access automatically, and thus you are not required to enter

those values manually.

1 Open the menu with »i« button.

2 Select »NETWORK APPS« menu with »V« or »Λ« and confirm with »●«

»NETWORK APPS« menu will be displayed.

3 Select »Connection Type« option with »V« or »Λ« and select »Wireless« with »<«

and »>«.

4 Select »Network Configuration« option with »V« or »Λ« and select »Auto« with »<«

and »>«.

5 Go to »Select Access Point« option with »V« or »Λ« and confirm with »●«

– »Select Access Point« menu appears and available wireless networks are scanned

and displayed in the menu.

September 2011

Table of Contents