Table of Contents
Advertisement
CONTENTS
3
4
4
4
4
5
5
C onnecting the antenna and the mains
cable
6
Inserting batteries in the remote control
6
Adjusting the inclination of the screen
7
7
8
9
10 SETTINGS
10
11
C hanging stored channels for digital
stations
12
13
14 TELEVISIONOPERATION
14
15
15
15
16
17 TELETEXTMODE
17
17
18 CONVENIENCEFUNCTIONS
19 PARENTALCONTROL
20 TIMERFUNCTIONS
22
22
23
23
23
24
2
ENGLISH
----------------------------------------------------------------------------------------------------------------------------------
25 USINGEXTERNALDEVICES
25
25
26
27
28
29
29
card
30 SPECIALSETTINGS
30
30
32
C hanging stored channels for analogue
stations
34 INFORMATION
34
34
35
35
35
36
Troubleshooting
37
A dditional Information for units sold in the
UK.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Grundig 22 VLC 2000 T
Summary of Contents for Grundig 22 VLC 2000 T
-
Page 1: Table Of Contents
CONTENTS ---------------------------------------------------------------------------------------------------------------------------------- 25 USINGEXTERNALDEVICES 3 SET-UPANDSAFETY High definition – HD ready 4 GENERALINFORMATION Connection options Special features of your television Connecting an external device Receiving digital stations Headphones What is Common Interface? Connecting a PC Inserting the CA module 5 CONNECTION/PREPARATION A ccess control for CA module and smart C onnecting the antenna and the mains card cable Inserting batteries in the remote control 30 SPECIALSETTINGS Adjusting the inclination of the screen Tuning digital television stations Tuning analogue television stations 7 OVERVIEW C hanging stored channels for analogue C onnections and controls on the stations television set... -
Page 2: Set-Upandsafety
SET-UPANDSAFETY ----------------------------------------------------------------------------------------------- Please note the following information when set- C lean the cabinet of your LCD television with ting up your television set. the enclosed cloth. Only use plain water. This television set is designed to receive and Please note when deciding where to put the display video and audio signals. device that furniture surfaces are covered by Any other use is expressly prohibited. various types of lacquer and plastic, most of which contain chemical additives. These may The ideal viewing distance is 5 times the cause corrosion to the feet of the device, thus screen diagonal. resulting in stains on the surface of the External light falling on the screen impairs furniture which can be difficult or impossible picture quality. to remove. To assure sufficient ventilation make sure there The screen of your LCD television meets the is enough space around it in the wall unit. highest quality standards and has been checked for pixel faults. The television set is designed for use in dry rooms. If you do use it in the open, please en- Despite the great care taken in manufacturing, sure that it is protected from moisture, such as technological reasons make it impossible to rain or splashing water. completely discount the possibility that some pixels may be faulty. Do not expose the television set to any mois- ture. Do not place any vessels such as vases Provided they are within the thresholds speci- on the television, as they may spill liquid, thus fied by the DIN norm, pixel faults of this kind presenting a safety risk. -
Page 3: Generalinformation
GENERALINFORMATION - -------------------------------------------------------------------------- Specialfeaturesofyour WhatisCommonInterface? television Common Interface (CI) is an interface for DVB receivers. This television can receive and process all analogue and all unencrypted digital stations. Encoded stations can only be viewed with a CA This television set has an integrated digital and module suitable for the encoding system and the analogue receiver. The digital receiver unit con- corresponding smart card. verts the signals from digital stations to provide The television set is equipped with a Common outstanding audio and picture quality. Interface slot into which CA modules from vari- The TV guide (only for digital stations) tells you ous providers can be inserted. of any schedule changes at short notice, and You can insert the provider’s smart card into the provides an overview of all the stations’ sched- CA module in order to enable the encrypted sta- ules for the next few days. tions you want to see. Detailed information on the individual stations – if it is provided by the broadcaster – is also available in the electronic programme guide. You can connect various data media, for ex- ample, an external hard drive, a USM memory stick or a digital camera to the USB socket. Using the file browser, you can then select and play the file formats you want (for example, MP4, MP3 or JPEG data). The television set has a comprehensive, user- friendly menu system. The menu is displayed on the television screen, and the functions of the remote control buttons are explained. -
Page 4: Connection/Preparation
CONNECTION/PREPARATION - --------------------------------------------------------- Connectingtheantennaandthemainscable 2 Plug the mains cable supplied into the »AC 1 Plug the cable of the rooftop or indoor IN« mains socket of the television. antenna (passive or active indoor antenna with its own power supply for digital television 3 Plug the mains cable into the wall socket. stations) into the antenna socket »ANTIN« on the tele v ision set; or plug the rooftop antenna cable (for analogue television stations) into the »ANTIN« socket Note: on the television. Only plug the device into the mains socket after you have connected the external de- vices and the antenna. Only connect the television using the power cord supplied to a suitable earthed safety Note: socket. When connecting an indoor antenna you Do not use an adapter plug or extension may have to try it out at different positions lead which does not meet the applicable... - Page 5 CONNECTION/PREPARATION - --------------------------------------------------------- Insertingbatteriesintheremote Adjustingtheinclinationofthe control screen 1 Carefully tilt the screen forward or back. 1 Open the battery compartment by removing the lid. 2 I nsert the batteries (2 x 1.5 V micro for example R03 or AAA). Observe the polarity (marked on the base of the battery compart- ment). 3 Close the battery compartment. Note: If the television no longer reacts properly to remote control commands, the batteries may be flat. Be sure to remove used batteries. The manufacturer accepts no liability for damage re s ulting from used batteries. Environmentalnote Batteries, including those which contain no heavy metal, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound man- ner. Find out about the legal regulations which apply in your area.
-
Page 6: Overview
OVERVIEW - --------------------------------------------------------------------------------------------------------------------------------- Connectionsandcontrolsonthetelevisionset ACIN Power cord socket. S witches the television on from standby and back into standby SCART S CART socket (FBAS signal, RGB mode. signal). D ecreases the volume; PC-IN VGA socket, video input for PC. station selection down. PCAudio Audio input for PC. V/P P re-selection for volume or station. LR Audio input for camcorder. Switches the television on from standby. Video Video input for camcorder. I ncreases the volume; HDMI H DMI socket, audio/video input station selection up. (HDMI). -
Page 7: The Remote Control - Main Functions
OVERVIEW - --------------------------------------------------------------------------------------------------------------------------------- Theremotecontrol-mainfunctions S witches the television on Sound on/off (mute). from standby and back into standby mode. S witch the television on from standby mode. Select stations directly. Zapping function S witches between picture formats. Opens the pre-selection for AV channels and the A djust the volume. USB input. Then select with » « or » « and con- firm using »OK«. S witch the television on O pens the menu. from standby mode; select channels in steps. S witches between teletext mode, mixed mode and TV mode. Cursor control ... -
Page 8: The Remote Control - All Functions
OVERVIEW - --------------------------------------------------------------------------------------------------------------------------------- Theremotecontrol-allfunctions TXT S elects the next track/the next picture in the file browser. 16:9 Selects the split screen function P age hold in teletext mode; in teletext mode. selects the previous track/ 0FAV O pens the channel list favou- the previous picture in the file rites. browser. REPEAT Selects subpages in teletext Selects different subtitles (in digi- mode; tal TV mode). selects the repeat function in the Selects different languages (in file browser. digital TV mode). EPG/?/A-B O pens the electronic TV guide. Reveals answers in teletext mode. repeats a selection of a re- corded programme. -
Page 9: Searching For Television Stations
SETTINGS - -------------------------------------------------------------------------------------------------------------------------------------- Searchingfortelevisionstations 4 Select »Auto Tuning« with » « or » « and confirm with »OK«. T he television has an automatic tuning function, – »Country Selection« is active. which first searches for digital TV channels and then analogue ones. 5 Press » « or » « to select the country. 6 Select the »Scan Type« with » You start the search and can then sort the televi- « or » «. sion stations into your order of preference. Press » « or » « to select whether you want to search for only digital television stations There are 400 presets for digital channels and (DTV), only analogue television stations (ATV) 99 for analogue channels, to which you can or both (ATV & DTV). assign TV stations from the antenna or from the cable connection (analogue channels). 7 Select »Time zone« with » « or » «. Press » « or » « to select time zone. 1 Press »POWER«, »1…0« or »P+« or »P–« 8 Press »OK« to start the search for terrestrial to switch on the television from standby mode. - Page 10 SETTINGS - -------------------------------------------------------------------------------------------------------------------------------------- Changingstoredchannelsfor Movingchannelstodifferentpre- sets digitalstations 1 I n the »Programme Table« menu, press » « or You can change the order of the channels found » « to select the channel to be moved. as required, delete channels you do not need and block access to certain presets (parental 2 Press »●« (green) to highlight the channel. control). 3 E nter the new presets with one, two or three Press »●« (blue) to switch between »Programme digits using »1…0«. Table – ALL TYPE«, »Programme Table – DTV«, 4 Press »OK« to confirm the entry. »Programme Table – RADIO« and »Programme Table – ATV«. Notes: Press »●« (red) to display the channels assigned To sort the other television channels, repeat to a network. steps 1 to 4. Press »P+« to switch the channel list to the next Stations that are assigned to fixed preset page, press »P–« to switch it back to the previ- numbers (such as French stations with LCN ous page.
-
Page 11: Picture Settings
SETTINGS - -------------------------------------------------------------------------------------------------------------------------------------- Picturesettings Skippingtelevisionstations You can highlight television stations to be 1 Open the menu with »M«. skipped when you select with »P+« or »P–«. It is – The »PICTURE« menu is displayed. still possible to select using the number buttons. 1 I n the »Programme Table« menu, select the PICTURE television channel with » « or » «. Picture Mode Vivid 2 P ress » « to switch to the » « symbol and Brightness ●●●●●●●● press »OK« to highlight the television chan- Contrast ●●●●●●●● nel. Colour – T he channel is marked with » «. -
Page 12: Audio Settings
SETTINGS - -------------------------------------------------------------------------------------------------------------------------------------- »MPEG NR.« reduces any interference from Automaticvolume artefacts (pixel blocks) from digital stations The television channels broadcast at different with MPEG compression (such as from DVB- volumes. The automatic volume limiting (AVL) T receivers or DVD players). function means the volume is kept the same You can only change the backlighting if the when you switch between channels. »Dynamic Backlight« function is switched 1 Select »AVL« with » « or » « and then select off. »On« with » « or » «. 5 Press »M« to end the setting. Stereo/twochannel,mono Audiosettings If the device receives two channel programmes, e.g. a film with the original sound on sound 1 Open the menu with »M«. channel B (display: »Dual II«) and the dubbed – The »PICTURE« menu is displayed. version on sound channel A (display: »Dual I«), you can select the sound channel you desire. SOUND If the device receives stereo or Nicam pro- grammes, it switches automatically to stereo Volume ●●●●... -
Page 13: Basic Functions
TELEVISIONOPERATION - ----------------------------------------------------------------------------- Basicfunctions Switchingbetweendigitalandana- loguechannels Switchingonandoff 1 Open the »INPUT SOURCE« menu by press- 1 Press »POWER«, »1…0« or »P+« or »P–« ing » «. to switch on the device from standby mode. 2 Press » « or » « to select »DTV« (digital pre- 2 Press the »POWER« button to switch the sets) or »ATV« (analogue presets) and press television to standby mode. »OK« to confirm. Selectingchannels Adjustingthevolume 1 Use »1…0« to select channels directly. 1 Adjust the volume with »V+« or »V–«. 2 Press »P+« or »P–« to move up and down channels. Muting 3Open the channel list by pressing »OK«, 1 Use »MUTE« to switch the sound off (mute) select the station with » « or » « and press and to switch it on again. »OK« to switch off the channel list. Displayinginformation 4 Press »M« to switch off the channel list. 1Press »i« to display the information. Selectingstationsfromlists – The display disappears automatically after a short while. You can select stations from various lists, (e.g. -
Page 14: Zoom Function
TELEVISIONOPERATION - ----------------------------------------------------------------------------- Subtitles In addition, information about the pro- gramme currently being transmitted is You can select various subtitles when watch- displayed with detailed information. ing digital channels. This depends on the pro- gramme being broadcast. 3 Press » « to switch to today’s programme. 1 Open the selection menu with » «. Note: 2 Select your language using » « or » « and You can open and switch off extensive pro- press »OK« to confirm. gramme information with »i«. 4 Press » « to select information on the next Zoomfunction programme and, » « to return to the informa- With this function, you can enlarge the picture tion for the current programme. on the television or computer. 5 Press »●« (green) to select the next days, and 1Activate the zoom function by pressing and »●« (red) to return to today. holding down » «. Notes: Zappingfunction Press »●« (blue) and »OK« to transfer the selected programme into the memory timer. This function enables you to switch or zap between the two TV stations you last selected ( Press »●« (yellow) to open the memory select with »1…0« directly). -
Page 15: Changing The Picture Format
TELEVISIONOPERATION - ----------------------------------------------------------------------------- Changingthepictureformat »Subtitle«format If you cannot read the subtitles which appear on The television automatically switches to the 16:9 the bottom of the screen, then select »Subtitle«. format if this format is detected via the Euro-AV socket. »Panorama«and»CinemaPanora- 1 Select the picture format with »16:9«. The ma«format selected picture format, for example »16:9«, This setting is suited to films with a large width/ appears on the screen. height ratio. – Y ou can choose between the following During programmes in 4:3 format the picture is picture formats: stretched horizontally if the »Panorama« function is selected. The picture geometry is stretched »Auto«format horizontally. The picture format is automatically switched to »16:9« for 16:9 programmes. The picture format is automatically switched to »4:3« for 4:3 programmes. »16:9«and»14:9«formats During programmes in 4:3 format, the picture is stretched horizontally if »16:9« or »14:9« is selected. The picture geometry is stretched horizontally. With actual 16:9 signal sources (from a set-top box on the Euro-AV socket) the picture fills the screen completely and with the correct geom- etry. »4:3«format The picture is shown in 4:3 format. -
Page 16: Flof Text And Normal Text Mode
TELETEXTMODE - --------------------------------------------------------------------------------------------------------------- FLOFtextandnormaltextmode Callingupasub-pagedirectly If the selected teletext page contains further 1 Press »TXT« to switch to teletext mode. pages, the number of the current sub-page as 2 Use »1…0« to enter the page number well as the total number of pages is displayed. directly or » « and » «, to switch up and down pages (to return to page 100, press 1Call up the sub-pages with » «. INFO » «). 2 Press »1…0« to enter the sub-menu. Note: 3Press » « to quit the function. At the bottom of the screen, you will see an Revealanswer information line consisting of a red, green and, depending on the station, yellow and Certain teletext pages contain ”hidden answers” blue text field. Your remote control has but- or information which can be called up. tons with the corresponding colours. 1 Display information with »EPG«. 3 Press »●« (red), »●« (green), »●« (yellow) 2Conceal information with »EPG«. - Page 17 CONVENIENCEFUNCTIONS - ----------------------------------------------------------------- 1 Open the menu with »M«. Resettingthetelevisiontoitsorigi- – The »PICTURE« menu is displayed. nalstate 2 Select »OPTIONS« with » « or » « and This function enables you to delete the station lists and all custom settings. press »OK« to confirm. 1 Select »Restore Factory Defaults« with » « or OPTIONS » « and press »OK« to confirm. 2 Select the »Yes « button with » « or » « and Language Settings confirm the reset function with »OK«. Restore Factory Defaults – The »Installation Guide« menu is displayed. OSD Timeout 3 Continue the settings as described in the PC/HDMI Game Mode chapter on searching for television stations on Automatic Update page 10. Software Update Settingthescreenmenudisplay...
- Page 18 PARENTALCONTROL - ------------------------------------------------------------------------------------------- 1 Open the menu with »M«. Blockatelevisionchannel – The »PICTURE« menu is displayed. You can block individual television channels which are not suitable for children using a per- 2 Select the »PARENTAL CONTROL« menu with sonal PIN code. » « or » « and press »OK« to confirm. 1 Select »Block Programme« with » « or » « 3 Enter the PIN code »0000« with »1...0«. and press »OK« to confirm. – T he »Block Programme« menu appears. PARENTAL CONTROL 2 I n the »Block Programme« menu, press » « Lock System or » « to select the channel and press »●« Set PIN (green) to confirm. Block Programme – I n the »Block Programme« menu the symbol Parental Guidance »D« is displayed after the station.
- Page 19 TIMERFUNCTIONS ---------------------------------------------------------------------------------------------------- 1 Open the menu with »M«. Switch-ontimer – The »PICTURE« menu is displayed. In the »On Time« menu, you can enter a switch- on time for the tele v ision. 2 Select the »TIMER« menu with » « or » « The television switches on with the preset volume and press »OK« to confirm. and the desired channel after the set time in stand-by mode has elapsed. TIMER 1 Select »On Time« with » « or » « and press »OK« to confirm. Clock 19 /Jun 2008 14:35 2 Select »Activate« with » « or » « and press Off Time » « or » « to choose when the television On Time should switch on. Sleep Timer 3 Select »Hour« with » « or »...
- Page 20 TIMERFUNCTIONS ---------------------------------------------------------------------------------------------------- Automaticswitch-off(AutoTimer) If this function is activated, the television switches off after 5 minutes on stand-by if no video signal is transmitted. 1 Select »Auto Sleep« with » « or » « 2 Press » « or » « to switch the function »On«. Note: Switch off the function by pressing » « or » « to set it to »Off«. 3 Press »M« to end the setting. Settingthetimezone The television automatically detects the local dif- ference to Greenwich Mean Time (the selected channel provides a time signal). You can set the local time difference yourself if the time is not de- tected or is not the same as your local time. 1 Select »Time Zone« with » « or » « 2 Set the time zone with » « or » « (in Ger- many: + 1.00 hour). 3 Press »M« to end the setting. 21 ENGLISH...
-
Page 21: 22 Usb-Mode
USB-MODE - --------------------------------------------------------------------------------------------------------------------------------- Thefileformats Connectingexternaldatamedia Your television can be operated via the USB Before connecting the data medium, switch input with the following file formats: the television to stand-by with »POWER«. Connect the device and then switch the tele- MP4videodata vision on again. The MP4 process was designed to compress Before connecting the data medium, the video files. television must first be switched to standby, An MP4 video is an encoder/decoder, based otherwise files can be damaged. on the MPEG-4 compression system, which is used to decrypt and display compressed video The USB port supplies the data medium with data. a maximum of 500 mA. Use an external This enables the televsion to play back videos power adapter if you want to use a hard compressed in the MPEG 4 SP format. -
Page 22: The File Browser
USB-MODE - --------------------------------------------------------------------------------------------------------------------------------- Switchingonautomaticpreview Thefilebrowser If the automatic preview is switched on, you can The file browser displays the data (AVI., JPEG, see the selected JPEG picture in the main menu MP3, MP4 or WMA data) that the external of the file browser. data medium offers. 1 Select »Auto Preview« with » « or » « If a data medium contains different file formats, you can deactivate data you do not need for 2 Press » « or » « to switch on the (on) func- the playback using a filter function (All Sup- tion. ported, Text, Movie, Music, Photo). 3 Press »M« to end the setting. Themainmenuofthefilebrowser Selectingthedisplaydurationof theslideshow 1 Select »Slide Show Interval« with » « or » «. All Supported 2 Select the time (3, 5, 10 seconds) with » « or » «. 3 Press »M« to end the setting. Bilder Musik 1 Musik 2 Selectingthedisplaymode Filme... -
Page 23: Additional Playback Functions
USB-MODE - --------------------------------------------------------------------------------------------------------------------------------- – F or playing MP3 or WMA data, informa- Selectingatrackorpictureinsteps tion on the album, track and singer is (SKIP) displayed at the right of the menu. 1 During playback, select the next track/picture – W hen playing picture data, information you want with » «. about the resolution and the size is dis- 2 Select the previous track/picture with » «. played at the right of the menu. – P layback begins with the track or picture Note: you selected. The file browser is switched off when playing Forwardsearch (only MP4 video files) picture data. Press » « (yellow) to switch You can select different speeds (2-fold, 4-fold, back to the file browser. 8-fold and 16-fold forwards and backwards). -
Page 24: High Definition - Hd Ready
USINGEXTERNALDEVICES --------------------------------------------------------------------- Connectionoptions Highdefinition–HDready Your television can Which television socket(s) you connect your playback high-defini- external devices to depends on the sockets tion television signals the external device is equipped with and the (HDTV). signals which are available. You can connect the Note that with many external devices the res- input sources (HDTV olution of the video signal must be adapted set-top box or High to the input sockets on the television (check Definition DVD player) to the »HDMI« socket the external device’s instruction manual). (digital HDTV signal). You can find out which values you need to This ensures that you can view digital HDTV set by referring to the guidelines in the sec- programmes, even if they are copy-protected tion about connection options. (HDCP High Bandwidth Digital Content Protec- Do not connect any other equipment while tion). the device is switched on. Switch off the other equipment as well before connecting it.Only plug the device into the mains socket after you have connected the external de-... -
Page 25: Connecting An External Device
USINGEXTERNALDEVICES --------------------------------------------------------------------- Connectinganexternaldevice Note: If this function is activated, the decoder (con- Withadigitalaudio/videosignal nected to the »AV1« socket) provides a de- Suitable devices: Digital satellite receiver, coded audio/video signal. Playstation, BluRay player, DVD player/re- 1 Open the menu with »M«. corder, set-top box, notebook, PCs. – The »PICTURE« menu is displayed. Video signal: digital video; resolution: stan- dard 576p; HDTV 720p, 1080i. 2 Select »OPTIONS« with » « or » « and Audio signal: digital audio (stereo, multi-chan- press »OK« to confirm. nel compression, uncompressed). 3 Select the »Decoder« with » « or » «. Channel position »HDMI«. 4 Press » « or » « to switch the function 1 Connect the »HDMI« socket on the televi- (»On«). sion and the corresponding HDMI socket on the external device using a standard HDMI cable 5 Press »M« to end the setting. (digital video and audio signal). UsingtheEuro/AVsocket(S-Video Withananaloguevideosignal signal) (progressive) Suitable devices: DVD player/recorder, video Suitable devices: DVD player/recorder, recorder, camera recorder, notebook, PCs. -
Page 26: Headphones
USINGEXTERNALDEVICES --------------------------------------------------------------------- Headphones Usingavideorecorder,DVDplayer orset-topbox Connectingtheheadphones 1 Switch on the video recorder, DVD player or 1 Plug the headphone jack (3.5 mm ø jack set-top box and select the function you wish to plug) into the headphone socket on the right use. side of the television. 2 Press » «, select the input signal channel Note: with » « or » « (»SCART«, »AV«, »S-Video«, Prolonged listening with the head phones at »HDMI« or »YPBPR«) and press »OK« to loud volumes can damage your hearing. confirm. Selectingaudiosettingsforthe headphones 1 Open the menu with »M«. – The »PICTURE« menu is displayed. 2 Select the »SOUND« menu with » « or » « and confirm with »OK«. 3 Select the »Headphone« with » « or » «. 4 Adjust the volume with » « or » «. 5 Press »M« to end the setting. 27 ENGLISH... -
Page 27: Connecting A Pc
USINGEXTERNALDEVICES --------------------------------------------------------------------- ConnectingaPC PC SETUP 1 Connect the socket »PC-IN« on the television to the corresponding socket on the PC using a Auto Adjust VGA cable. Horizontal Position ●●●●●●●● 2 Connect the socket »PCAUDIO« on the Vertical Position ●●●●●●●● television to the corresponding socket on the Size ●●●●●●●●●● PC using a cinch cable (audio signal). Phase ●●●●●●●●● Note: Adjust your PC to the monitor (for example, picture resolution 1280 x 768, picture fre- Back quency 60 Hz). Select Exit Selectingthechannelpositionfor – O ptions: thePC »Auto Adjust«... -
Page 28: Inserting The Ca Module
USINGEXTERNALDEVICES --------------------------------------------------------------------- InsertingtheCAmodule AccesscontrolforCAmodule andsmartcard Note: 1 Open the menu with »M«. Switch off the appliance before inserting the – The »PICTURE« menu is displayed. CA module in the »CI« slot. 2 Select the »CHANNEL SETUP« menu with 1 Insert the smart card into the CA module. » « or » « and confirm with »OK«. 2 Insert the CA module with the smart card into 3 Select »CA–Module« with » « or » « and the »CI« slot on the television. press »OK« to confirm. Note: Notes: To see which CA module is in the Common This menu give operating instructions and – Interface slot, go to the »CA - Module« sub- after you enter your PIN code – access to menu. channels of the PAY-TV provider. The remaining settings are described in the manuals for your CA module and smart card. 4 P ress »M« to finish the settings. 29... -
Page 29: Tuning Digital Television Stations
SPECIALSETTINGS ----------------------------------------------------------------------------------------------------- Tuningdigitaltelevisionstations Tuninganaloguetelevisionsta- tions This search deletes all television stations in- cluded in the channel list! This setting is only necessary if you cannot re- ceive any digital stations and you have not car- Tuningalldigitaltelevisionstations ried out an analogue search during initial setup. withcableconnectionbyautotun- The television station can be set directly or using the search. 1 Open the menu with »M«. Switchingthetelevisiontoana- – The »PICTURE« menu appears. loguechannels 2 Select the »CHANNEL SETUP« menu with 1 Open the »INPUT SOURCE« menu by press- » « or » «. ing » «. CHANNEL SETUP 2 Select input source »ATV« with » « or » « and press »OK« to confirm. Auto Tuning Note: Digital Manual Tuning Additional operations are explained in the Analogue Manual Tuning following sections. - Page 30 SPECIALSETTINGS ----------------------------------------------------------------------------------------------------- – T he »Searching...« menu appears, and the Note: search for analogue TV stations begins. This The current system is displayed in the »Sys- may take several minutes depending on the tem« line. If the colour and/or sound is not functioning correctly, select »System« with number of television stations received. » « or » «. Select the necessary settings Note: with » « or » «. 8 Press »●« (red) to finish the setting. You can stop the search by pressing »M«. 6 Press »M« to end the setting. Note: To set other television stations, repeat steps Tuningtheanaloguetelevision 4 to 8. channelsbyenteringthechannel 9Press »M« to end the setting. numbers Finetuninganaloguetelevisionsta- 1 Open the menu with »M«.
- Page 31 SPECIALSETTINGS ----------------------------------------------------------------------------------------------------- Changingstoredchannelsfor Sortingtelevisionchannels analoguestations 1 I n the »Programme Table« menu, press » « or » « to select the channel to be moved. If channels were stored with the automatic channel search during the tuning of the televi- 2 Press »●« (green) to highlight the channel. sion channels, you can delete them. You can 3 E nter the new presets with one, two or three also store stations in a different preset, change digits using »1…0«. or enter the name of a stations as well as skip channels. 4 Press »OK« to confirm the entry. Selectchannellists Notes: 1 Open the menu with »M«. To sort the other television channels, repeat – The »PICTURE« menu is displayed. steps 1 to 4. 2 Select the »CHANNEL SETUP« menu with Enteringthechannelnames » « or » « and confirm with »OK«. (maximumof8characters) 3 Select »Programme Table« with » « or » « 1 In the »Programme Table« menu, select the and press »OK« to confirm. desired channel with »...
- Page 32 SPECIALSETTINGS ----------------------------------------------------------------------------------------------------- Creatingalistoffavourites You can select your favourite channels and save them in up to four lists (FAV1 to FAV4). 1 In the »Programme Table« menu, select the television channel with » « or » «. 2 “Push” the television channel with » « or » « into the favourites list 1 to 4 and save it with »OK«. – T he position in the favourites list is marked with »❤«. – Y ou can enter the same channel in more than one favourites list. Note: You can delete channels from the favourites list. Press » « or » « and » « or » « to se- lect the channel and »OK« to delete it. Concludingthesettings 1 Press »M« to finish the settings. 33 ENGLISH...
-
Page 33: Displaying Signal Information
INFORMATION - ----------------------------------------------------------------------------------------------------------------- Updatingsoftware Displayingsignalinformation (only for digital television channels) (only for digital television channels) 1 Open the menu with »M«. 1 Open the menu with »M«. – T he »PICTURE« menu appears. – T he »PICTURE« menu appears. 2 Select the »OPTIONS« menu with » « or 2 Select the menu »CHANNEL SETUP« with » «. » « or » «. 3 Select the »Software Update« menu by press- 3 Select »Signal Information« with » « or » « ing » « or » «. and press »OK« to confirm. – Y ou will see information on the channel, 4 Press »OK« to start the software update. modulation, quality and signal strength. – The software is updated automatically, if possible. Notes: 5 Press »M« to end the setting. -
Page 34: Technical Data
INFORMATION - ----------------------------------------------------------------------------------------------------------------- Technicaldata Serviceinformationfordealers Operating voltage: The television set may only 2 20 - 240 V ∼, 50 - 60 Hz be operated with the mains adapter supplied. Power consumption: T he product complies with the in operation 45 W following EU directives: in standby 0,95 W 2006/95/EG directive for electrical equip- Sound output: ment to be used within defined voltage ranges. 2004/108/EG directive on electromagnetic 2 x 6 watts music (2 x 3 sine wave) compatibility. Rohs Limits Pb (Lead)/Hg (Mercury) The device complies with the following stan- Pb meets ROHS limtis / 20,0 mg dards: EN 60065, EN 55013, EN 55020, EN 55022, EN 55024. Display Area (dm 12,81 dm Environmentalnote Peak Luminance (Ratio, home mode, max.) This product has been made % 95 / 285 / 300 from high-quality parts and Reception ranges: materials which can be re-used Analogue: and recycled. C01 ... C80, special channels S01 ... S41 Therefore, do not throw the product away with normal household waste at the end of its life. - Page 35 INFORMATION - ----------------------------------------------------------------------------------------------------------------- Troubleshooting If the remedies given below do not work, please consult an authorised GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers. Problem Possiblecause Remedy Screen lit (snow), but no Antenna cable Is the antenna cable connected? station No TV station programmed Start a station search Poor picture contrast Picture settings incorrectly set Adjust the brightness, contrast or colour setting Problem at station Test with a different station Interference to picture Interference from other devices Change the position of the device and/or sound Ghosting, reflection Channel setting Automatic or manual channel setting/fine tuning Antenna Have antenna cable or system checked No colour Colour intensity at maximum Turn up the colour TV standard setting (if setting Select the correct colour standard option is available)
- Page 36 INFORMATION - ----------------------------------------------------------------------------------------------------------------- AdditionalInformationforunits As the colours of the wires in the mains lead of your appliance may not correspond with the soldintheUK. coloured marking identifying terminals in your Units sold in the UK are suitable for operation plug, proceed as follows: from a 240V ac, 50Hz mains supply. Connect the BLUE coloured wire to plug ter- The range of multi-system receivers is built to minal marked with the letter “N” or coloured work in most European countries. However, the black. mains plug and socket system for the UK differs Connect the BROWN coloured wire to the plug from many European countries. terminal marked with the letter “L” or coloured This appliance has been supplied with a fitted, red. non-removable, approved converter plug for In no circumstance must any of the wires be use in the UK. This converter plug is fitted with a connected to the terminal marked with the letter 5A rated fuse. “E”, earth symbol “V”, coloured green, or green In case this appliance is supplied with a & yellow. moulded 2-pin Euro plug only, which is unsuit- able for UK operation, this must be cut off and immediately disposed of. An approved 13A, 3-pin UK plug should then be fitted by a quali- fied electrician. Note: The severed Euro plug must be destroyed to avoid a possible shock hazard should it be inserted into a socket elsewhere. If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is used, it must be fit- ted with a 5A ASTA or BSI approved BS1362...
- Page 37 10/08 72011 739 6000...
Need help?
Do you have a question about the 22 VLC 2000 T and is the answer not in the manual?
Questions and answers