TP CHASSIS / TELEVISION
Once the module is inserted, module verification process starts. In this case, warning
menus appear on TV.
On "CA – Module" menu, we should see "Irdeto Access" message.
After selecting CA – Module => Irdeto CA Status => Digital Card Status, we should
see serial number of the Smart card as well as "Card Inserted" message in "Status"
tab. If the card is inserted incorrectly or if it is broken, the information on this menu
may be missing.
After this check, please select CA Module=>CAM Management=>CAM Info and
check CAM software and hardware. Any missing or irrelevant information indicates
that CAM module is faulty.
114
September 2011