Yamaha Star Stratoliner 2013 Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
To set the clock
4
1. Clock
1. Push the "SELECT" switch to
change the display to the clock
mode.
2. Push the "SELECT" and reset
switches together for at least two
seconds.
3. When the hour digits start flashing,
push the reset switch to set the
hours.
4. Push the "SELECT" switch, and
the minute digits will start flashing.
5. Push the reset switch to set the
minutes.
6. Push the "SELECT" switch and
then release it to start the clock.
Self-diagnosis device
1
1. Engine trouble warning light "
2. Error code display
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If a problem is detected in any of those
circuits, the engine trouble warning light
will come on or flash, and the odome-
ter/tripmeter/clock display will indicate
an error code.
If the odometer/tripmeter/clock display
indicates any error codes, note the
code number, and then have a Yamaha
dealer check the vehicle.
4-6
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
Brightness control mode
2
"
1. Multi-function meter unit panel
2. LCD
3. Speedometer needle
4. Tachometer needle
5. Fuel gauge needle
The brightness can be adjusted for the
following:
●
the multi-function meter unit panel
(item number "1")
●
the LCD (item number "2")
ECA11590