Power Button; Adding Accessories - Shark MESSMASTER VS100 Series Owner's Manual

Table of Contents

Advertisement

USING YOUR MESSMASTER™
IMPORTANT: Unplug the power cord before opening the lid.
ANYBAG TECHNOLOGY™
The MessMaster can be used with or without
a bag.
Vacuuming without a bag
You can vacuum straight into the dust cup
without a bag. The dust cup is removable and
dishwasher safe.
Vacuuming with a bag
Utilize AnyBag Technology by inserting
any plastic trash bag (2 to 13 gallons) to
line the inside of the dust cup for easy
disposal of debris.
Note: Carefully inspect the bag for damage
or holes. DO NOT use a bag with holes. DO
NOT use a bag when vacuuming sharp or
industrial debris.
1. Insert an undamaged plastic bag to
line the inside of the dust cup. Push the
bottom of the bag down to the base of the
dust cup.
2. Tuck the bag edge between the Bag Guides
and Dust Cup Shelf.
s h a r kc l e a n . c o m
Bag Guides
Dust Cup
Dust Cup
Shelf
Shelf
Bag Holder
Bag Holder
Slot
Slot
3. Run any excess bag through the Bag Holder
Slot on the top of the accessory holder.
4. Close the lid to secure the bag in place.
The lid should clamp over the excess bag.
USING YOUR MESSMASTER™

POWER BUTTON

1. Press the power button to turn on the
vacuum.
3

ADDING ACCESSORIES

3. For more specialized cleaning, add an
accessory by sliding it onto the hose inlet
until it connects securely (see Available
Accessories section for more information).
SETUP
1
2
HOSE INLET
2. Use the hose inlet for ANY mess.
s h a r kc l e a n . c o m

Advertisement

Table of Contents
loading

Table of Contents