Table of Contents
Advertisement
1
(Insert)
(Twist)
1. Place the Main Unit on the floor. To
attach the Hose, insert the Hose
Connector into the opening on the
side of the unit and twist clockwise
to the lock symbol.
3
(Insert)
3. Insert the Accessory Holder into
the notch on the side of the unit.
5
(Snap)
5. Insert accessories into the slots
on the accessory holder until they
snap into place.
s h a r kc l e a n . c o m
ASSEMBLY
2
(Click)
2. Wrap the hose around the Unit Lid.
Clip the hose to the unit by sliding
the opening on the Hose Inlet down
onto the Hose Storage Hook until it
clicks into place.
4
(Click)
4. Press the base of the accessory
holder towards the Dust Cup
until it clicks into place.
6
6. Neatly wrap the cord around the
unit handle for storage. Use the
cord clip on the plug to hold it
securely in place.
USING YOUR MESSMASTER™
Wet Debris
Max Fill
OPENING THE LID
1
1. Pull out the bottom of the latch to release,
then pull the latch down to unhook from
the lid.
CAPACITY
The dust cup has a dry debris capacity of 1
gallon and a wet debris capacity of 1/2 gallon.
When vacuuming wet or sloppy messes, do
not fill the dust cup above the Wet Debris
Max Fill line.
When debris reaches the Max Fill line, the
float mechanism in the dust cup will rise
automatically to cut off airflow. Suction will
cease and motor noise will become higher
in pitch. When this happens, turn off the
vacuum, unplug the power cord, and empty
the dust cup.
2
2. To open the lid, lift it by the handle.
s h a r kc l e a n . c o m
Advertisement
Table of Contents
