Farnell GT6-20A Manual

SFARNELL
MAINS FUSE
6.JA HRC
WA RNING
Check
a g e
Seiecto
Stabilsed
Powe
GI6-20A
Farnel!
tiiple eutput power supply GT6-20A
SELECTOR
VOLTS
+
Soft start circuit holds down in-rush current.
L.E.D. lamps indicate presence of outputs.
ON
AN
ouTPUT
Main output: 6V, 20A adjustable 4.75 to 6V.
Auxiliary output: 2x15V, 1.75A (GT6-20A) or 2x12V,
1.75A (GT6-20AB)
ON
PROG
Well protected. Main output: constant current limiting,
overvoltage protection, optional overcurrent trip. Auxil-
iaries: cut-back current limiting plus auto-reset thermo-
stat. Note: overvoltage and overcurrent trips disable all
outputs.
VOLTS
VOLTS
Switched-mode technique on main output for compact- 2.1kV input/output insulation.
ness and high efficiency.
OUTPU
ouTPUT
220-240V or 115-120V +10%45-440Hz input selected by Low r.f.i. Meets VDE0875, curve N requirements, CISPR
front panel switch
ON
Publication PS29
(publication 2) curve N and BS&00.
Test procedure includes numerous switch-on cycles and
elevated temperature test for maximum reliability.
Mechanically compatible with other manufacturers'
units. ldentical fixing. heat sink position etc.
Sample units have passed independent mechanical trials
Vibration: 2G 5-150Hz with max. displacement of
2.54mm; Bump: 1000 bumps at 30G with 6mS half sine
wave pulses; Shock: 3 shocks of 25G, 25mS duration,
half sine wave pulses in each mounting plane.