Table of Contents
Advertisement
UNPACKING YOUR NEW CR2 JR:
When your package is delivered, check the carton care-
fully for signs of rough handling. If your CR2 JR is
damaged, notify the carrier immediately and request an
inspection. Be sure to keep the carton, packing inserts,
packing lists and carrier's receipt until the inspector has
verified your claim.
EDIC's liability ceases when the carrier picks up the ship-
ment. However, our customer service staff will be happy
to furnish any information needed in connection with
the claim and will attempt to expedite a resolution.
PLEASE READ BEFORE OPERATING YOUR
NEW CR2 JR:
Read the manual carefully and completely before at-
tempting to operate the unit. This manual has important
information for the use and safe operation of the ma-
chine. Keep this manual handy at all times.
This equipment has been engineered and manufactured
to provide excellent performance and service. To ensure
that your equipment will continue to perform as intend-
ed:
•
Maintain equipment regularly- following the suggest-
ed maintenance schedule provided.
•
Use only original EDIC parts when servicing.
•
Operate equipment with care.
If additional information is needed, please contact:
EDIC 800-338-3342
All information and specifications printed in the man-
ual are current at the time of printing; however because
of EDIC's policy of continual product development, we
reserve the right to make changes at any time without
notice.
FAILURE TO COMPLY WITH THE FOLLOW-
ING WARNINGS AND INSTRUCTIONS WILL
VOID THE WARRANTY.
WARNING!
•
The machine was designed for use on hard surfaces,
applications as per instructions and recommenda-
tions written in this manual. Any deviation from its
proper use or purpose and the consequential damage
that may occur is the sole responsibility of the end
user.
•
Disconnect the power cord from the outlet before
servicing. Do not leave machine connected to an elec-
trical outlet when unattended.
•
Do not immerse or use this machine in standing wa-
ter. Such use may cause electric shock.
•
When using an extension cord, use only a 3-prong
conductor grounding cord-12 gauge wire or heavier.
•
To avoid electric shock, do not expose the unit to rain
or snow. Store it indoors in a heated location only.
•
Do not use the machine for dry vacuuming.
•
Use defoamer at all times to prevent damage to the
vacuum motor.
•
Do not use water in excess of 130°F (54°C) in the
solution tank
•
To prevent seal damage and chemical build-up to the
pump system, run clean water through the solution
lines after each day's use.
•
Use only commercially available carpet cleaning solu-
tions and defoamer intended for use with machines
of this type. Do not use dyes, bleaches, ammonia, or
other additives.
•
The use of powdered cleaning solution, if not diluted
properly, may result in damage to the pump. Pow-
dered chemical is not recommended. If powdered
chemicals are used, premix in a separate container
before placing in the solution tank.
•
Always read and understand your chemical's MSDS
(Material Safety Data Sheet) before use.
•
This equipment is not designed to handle or use
combustible/volatile substances such as gasoline or
kerosene, in, on, or near the machine. The use of such
materials will cause extreme hazardous condition.
•
Do not expose machine to freezing temperatures.
3
Advertisement
Table of Contents
