3 WORK
3.6
3.7
3.8
14
Removing the start number plate
S05336-10
Installing the start number plate
S05337-10
Removing the seat
Caution
Danger of burns The voltage regulator gets very hot when the vehicle is operated.
–
Allow the voltage regulator to cool down before performing any work.
S05350-10
S05351-10
–
1
Remove screw
.
–
Unhook the start number plate from the brake line and remove
it.
–
Position the brake line in holders
plate.
–
Position the start number plate. Mount and tighten screw
The holding lugs engage in the fender.
–
1
Remove screw
.
–
Pull seat toward the fuel tank and lift it off.
A
on the start number
1
.