Table of Contents
Advertisement
DISPLAY 02, DID NOT APPEAR ON THE SYSTEM CONSOLE
-
82
Cause: One or more of the following conditions existed when
you turned on the computer:
•
The Power switch on the system console is set to
0
(Off).
•
The keylock on the system console is in the Off position.
•
There is no electrical power at the outlet (where the system
console is plugged in)
.
•
The power cord on the system console is not plugged into
an electrical outlet.
•
The address assigned to the system console is not 0.
•
The cable between port 0 on the computer and socket 1 on
the system console is one or more of the following:
•
-
Not connected
-
Connected improperly
-
Connected to the wrong socket or port
-
Defective
The Terminator switch on the system console is set to 2
(see note).
3180 Model
2,
5553, 5555, and display
stat ions with one socket do not have
Terminator switches.
Section 6.A Continued
Advertisement
Table of Contents
