RESPONDING TO A SYSTEM REFERENCE CODE
-
100
To find the system reference code, scan the code column.
When you find the code, perform the action to recover from the
cause. Then try the operation you were performing again.
Code Column
0005
Cause:
The keystroke was invalid or the cursor was not in an
input field
.
Action:
Press the Error Reset key and the Erase
Input/
Home
key.
0012
Cause:
The computer tried to insert a character in the last
position of a field or the last position of every field needs
to be
blank.
Action:
Press the Error Reset key.
0016
Cause:
The Field Minus key
EJ
was pressed in a nonsigned
numeric field
.
Action:
Press the Error Reset
key.
A system reference code can appear on the
computer output display or system
console.
If
you see a display code on your computer that
is not in this section, see the manual
,
System
Messages, SC21-7938.
Section 6.E Continued